流体机械

2007, No.424(10) 29-32

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Past Issue) | 高级检索(Advanced Search)

增加短叶片的9-26型风机流场数值模拟
Air Flow Simulation in High-pressure Fan with Splitter Blade

李建锋;吕俊复;张海;刘青;岳光溪;
LI Jian-feng1,LV Jun-fu2,ZHANG Hai2,LIU Qing2,YUE Guang-xi2 (1.Scientific and Technical Service Center,China Electricity Council,Beijing 100038,China;2.Tsinghua University,Beijing 100084,China)

摘要(Abstract):

风机的设计过程中,可以采用在长叶片中间安装短叶片的方法来提高风机性能。为了深入了解增加短叶片后的风机流场,应用计算流体力学软件Fluent对某9-26型高压离心风机进行了加装短叶片后的数值模拟并对结果进行分析。计算结果显示,在相同的进出口条件下,增加短叶片的风机流量可增加约5%,出口全压平均增加约10%,叶片的长短对流量的增加也有所影响。计算中所采用的是标准k-ε湍流模型与非结构化网格。模拟结果可以有效帮助人们改进风机性能。
In the process of fan's design,splitter blades could be adopted in the middle of rotator to improve the performance of fan.In order to understand the flow pattern in the high-pressure centrifugal blower of 9-26type with splitter blade thoroughly,computational fluid dynamics Fluent is applied and the three dimensional air flows in the fan is numerically simulated and analyzed.The calculating results showed that under the same condition,the flux of the fan was improved 5%approximately and the mean total pressure at outlet of the fan was improved 10% because of the splitter blade,the length of the splitter blade affected the flux either.Standardk-εturbulent model and unstructured grids are applied in computation.The results of calculation can good helpful for people to improve the performance of the fan.

关键词(KeyWords): 离心风机;数值模拟;计算流体力学;长短叶片;流场
centrifugal fan;numerical simulation;CFD;splitter blade;flow field

Abstract:

Keywords:

基金项目(Foundation): 国家重点基础研究发展规划项目(20026309)

作者(Author): 李建锋;吕俊复;张海;刘青;岳光溪;
LI Jian-feng1,LV Jun-fu2,ZHANG Hai2,LIU Qing2,YUE Guang-xi2 (1.Scientific and Technical Service Center,China Electricity Council,Beijing 100038,China;2.Tsinghua University,Beijing 100084,China)

Email:

DOI:

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享