李彤,周建佳,袁寿其
LI Tong,ZHOU Jian-jia,YUAN Shou-qi

• 1:江苏大学流体机械工程技术研究中心

摘要(Abstract)：

为研究螺旋离心泵叶轮结构的振动特性,首先建立螺旋离心泵内部流场三维模型,对设计工况下的螺旋离心泵内流场进行了定常数值模拟,得到了叶片表面的压力载荷分布;建立叶轮有限元模型,以螺旋离心泵全流道三维定常数值模拟计算结果为基础,利用顺序耦合技术进行了有预应力的叶轮静应力分析和模态分析,结果表明:叶轮的最大应力出现在叶片进口的轮毂处,叶轮强度满足设计要求;叶轮最大的形变区域出现在叶片进口的轮缘处;叶轮的变形域随着频率的增加而增大;叶轮的各阶固有频率远大于泵的运行频率,因此在运行过程中不易发生共振现象。
In order to invest the vibration characters of the screw centrifugal pump impeller,the 3-D model of screw centrifugal pump flow field were set up first. The steady turbulence flow in the pump was simulated under the design condition to get the pressure distribution on the surface of the blades. Then founded the finite model of impeller and the static pressure and modal analysis were set using sequential coupling technique based on the simulation result. The results show that the maximum equivalent stress occurs at the blade connected with the hub and the intensity of impeller satisfies the design requirement; the maximum deformation of the impeller occurs at the edge of the blade inlet; the deformation domain is enlarged with the frequency ascended. The eign frequencies of impeller are far more larger than the working frequency,so the pump will not resonance easily in the running process.

关键词(KeyWords)： 螺旋离心泵;静应力;模态分析;流固耦合
screw centrifugal pump;static stress;modal analysis;fluid-solid interaction

Abstract:

Keywords:

基金项目(Foundation): 国家杰出青年科学基金资助项目(50825902);; 江苏省自然基金攀登项目资助项目(BK2009006);; 江苏高校优势学科建设工程资助项目

作者(Author): 李彤,周建佳,袁寿其
LI Tong,ZHOU Jian-jia,YUAN Shou-qi

参考文献(References)：

• [1]李仁年,李兵,韩伟.螺旋离心泵工作特性理论分析[J].农业机械学报,2005,36(6):51-53.
• [2]王国栋.螺旋离心泵内部流场及特性研究[D].兰州:兰州理工大学,2009:2-4.
• [3]金树德,陈次昌.现代水泵设计方法[M].北京:兵器工业出版社,1993:139-148.
• [4]Atia Khalifa,Amro AL-Qutub,Yehia Khulief,et al.Resolving high flow induced vibrations[J].World Pumps,2010,(12):35-40.
• [5]张文.转子动力学理论基础[M].北京:科学出版社,1990.
• [6]王勖成.有限单元法[M].北京:清华大学出版社,2007.
• [7]陈向阳,袁丹青,杨敏官,等.基于流固耦合方法的300MWe级反应堆主泵叶片应力分析[J].机械工程学报,2010,46(4):114-115.
• [8]吕志昆,郭延明.食品包馅机械中双极变量叶片泵的设计与计算[J].包装与食品机械,2013,31(2):22-24.
• [9]周国发,李红英.基于顺序耦合的火灾环境下气瓶热及力学响应数值模拟[J].压力容器,2012,29(9):28-32.
• [10]郑军,杨昌民,朱利,等.离心泵叶轮流固耦合分析[J].流体机械,2013,41(2):25-29.
• [11]丁思云,苏吉鑫,郑国运,等.双叶片螺旋离心泵固液两相流特性研究[J].流体机械,2012,40(5):9,26-29.
• [12]张锦,刘晓平.叶轮机振动模态分析理论及数值方法[M].北京:国防工业出版社,2001:142-152,334-337.