直线共轭内啮合齿轮传动重合度的计算分析The Calculation Analysis of Contact Ratio for Straight Conjugate Internal Gear Transmission
高铭良,崔建昆,黄冬平,刘爽,张丽华
GAO Ming-liang,CUI Jian-kun,HUANG Dong-ping,LIU Shuang,ZHANG Li-hua
摘要(Abstract)：
文章根据齿轮啮合基本原理,以齿轮传动重合度计算理论为基础,推导出直线共轭内啮合齿轮传动重合度计算公式,并分析研究影响直线共轭内啮合齿轮传动重合度的主要因素及其与重合度的关系,对直线共轭内啮合齿轮泵的设计理论及应用有一定的指导意义。
The article based on the basic principle of gear meshing and the theory of computation of gear contact ratio deduced a new calculation formula of straight line conjugate internal gear transmission,and then with the help of the new formula,that the main factors influencing the straight line conjugate internal gear contact ratio and the relationship with the gear contact ratio is analyzed,which has certain guiding significance for the design theory and application of linear conjugate internal gear pump.
关键词(KeyWords)：
直线共轭;内啮合齿轮泵;重合度;齿形半角
straight line conjugate;internal gear pump;contact ratio;half Angle of tooth profile
基金项目(Foundation): 上海市宝山区产学研合作基金项目(CXY-2013-1)
作者(Author):
高铭良,崔建昆,黄冬平,刘爽,张丽华
GAO Ming-liang,CUI Jian-kun,HUANG Dong-ping,LIU Shuang,ZHANG Li-hua
参考文献(References)：
- [1]崔建昆,秦山.直线共轭内啮合齿轮的流量脉动分析[J].机械设计,2004,21(z1):157-158.
- [2]叶素娣,徐敬华,徐圣伦.论重合度与齿轮参数的关系[J].绥化学院学报,2015(5):150-152.
- [3]曲秀全,戴恒震.关于渐开线圆柱齿轮重合度的另一种定义方法[J].现代机械,2002(4):46-47.
- [4]崔建昆,秦山,闻斌.直线共轭内啮合齿轮副啮合特性分析[J].机械传动,2004(6):12-15.
- [5]徐学忠,宋天麟.直线共轭齿轮泵的基本参数优化设计[J].机械传动,2007(4):69-71.
- [6]陈秀宁.机械设计基础(第三版)[M].浙江:浙江大学出版社,2011:84-141.
- [7]崔建昆,秦山,闻斌,等.QX型直线共轭内啮合齿轮泵研制[J].流体机械,2004,32(12):41-44.
- [8]陈仙凤,赵星波,蒲建中.基于FTA的不锈钢管壳式换热器失效模型安全评价分析[J].压力容器,2015,32(11):64-68.
- [9]吴序堂.齿轮啮合原理[M].北京:机械工出版社,1982:1-73.