张进杰,孙旭,江胜飞
ZHANG Jinjie,SUN Xu,JIANG Shengfei

• 1:北京化工大学压缩机技术国家重点实验室压缩机健康智能监控中心
• 2:北京化工大学高端机械装备健康监控与自愈化北京市重点实验室
• 3:中石油西南油气田分公司蜀南气矿

摘要(Abstract)：

针对往复压缩机在气量调节工况下因多系统耦合、多参数关联导致工作模型复杂,对压缩机动态特性分析难度大的问题,本文提出了针对气量调节系统与压缩机的多系统联合仿真的建模方法,首先建立独立的调节系统各模块工作模型,利用不同模型对接端口完成子系统模型之间的数据交互,融合压缩机工作模型构建了变负荷工况下往复压缩机工作特性分析模型,将仿真数据与实测数据进行对比,证明了多系统联合仿真与传统仿真方式相比,能够更准确地表达变负荷工况下压缩机的动态特性。
In order to solve the problem of difficulty in analyzing the dynamic characteristics of reciprocating compressor due to complex working model caused by multi-system coupling and multi-parameter correlation under the condition of capacity control of reciprocating compressor,in this paper,a modeling method for multi-system co-simulation of capacity control system and compressor was proposed.Firstly,the independent working model of each module of the capacity control system was established,and then the data exchange between subsystem models was completed using different model docking ports.The working characteristic analysis model of the reciprocating compressor under variable load condition was constructed by combining the working model of the compressor.By comparing the simulation data with the measured data,it was proved that compared with the traditional simulation method,the multi-system co-simulation can more accurately express the dynamic characteristics of the compressor under variable load conditions.

关键词(KeyWords)： 变负荷;往复压缩机;多系统;联合仿真
variable load conditions;reciprocating compressor;multi-system;co-simulation

Abstract:

Keywords:

基金项目(Foundation): 国家重点研发计划项目(2016YFF0203305);; 压缩机技术国家重点实验室(压缩机技术安徽省实验室)开放基金项目(SKL-YSJ201808;SKL-YSJ201911)

作者(Author): 张进杰,孙旭,江胜飞
ZHANG Jinjie,SUN Xu,JIANG Shengfei

参考文献(References)：

• [1]HONG W R，JIN J M，WU R R，et al.Theoretical analysis and realization of stepless capacity regulation for reciprocating compressors[J].ARCHIVE Proceedings of the Institution of Mechanical Engineers Part E：Journal of Process Mechanical Engineering，2009，223(4)：205-213.
• [2]TANG B，LI L S，ZHAO Y Y，et al.Theoretical and experimental study on stepless capacity control system of reciprocating compressor[C]//7th International Conference on Compressors and Their Systems 2011，2011：273-281.
• [3]TANG B，ZHAO Y Y，LI L S，et al.Thermal performance analysis of reciprocating compressor with stepless capacity control system[J].Applied Thermal Engineering，2013(54)：380-386.
• [4]LIU G，ZHAO Y，WANG L，et al.Dynamic performance of valve in reciprocating compressor used stepless capacity regulation system[J].Journal of Oral Rehabilitation，2014，28(1)：26-32.
• [5]何少炜，皮嘉立.基于多系统联合仿真技术的液压系统研究[J].电子测试，2016(10)：15-17.HE S W，PI J L.Hose rolling system design reaearch based on united simulation of multisystem[J].Electronic Test，2016(10)：15-17.
• [6]狄芳，焦仁雷，谈乐斌.高射炮随动系统机电联合仿真[J].机床与液压，2015，43(1)：153-156.DI F，JIAO R L，TAN L B.Antiaircraft gun servo system electromechanical co-simulation[J].Machine Tool & Hydraulics，2015，43(1)：153-156.
• [7]朱冰，赵健，李静，等.面向牵引力控制系统的AMESim与MATLAB联合仿真平台[J].吉林大学学报(工学版)，2008，38(S1)：25-29.ZHU B，ZHAO J，LI J，et al.Co-simulation platform with AMESim and MATLAB for traction control system[J].Journal of Jilin University(Engineering and Technology Edition)，2008，38(S1)：25-29.
• [8]梁利华，宁继鹏，史洪宇.基于AMESim与ADAMS联合仿真技术的减摇鳍液压系统仿真研究[J].机床与液压，2009(8)：210-212.LIANG L H，NING J P，SHI H Y.Simulation research of fin stabilizer hydraulic system based on AMESim and ADAMS co-simulation[J].Machine Tool & Hydraulics，2009(8)：210-212.
• [9]ZHANG J，JIANG Z，WANG Y，et al.Numerical simulation and experimental study on plate valve transient motion and fatigue fracture principles[J].International Journal of COMADEM，2014，17(2)：17-27.
• [10]DENNIS，ROSKOSCH，VALERIUS，et al.Thermodynamic model for reciprocating compressors with the focus on fluid dependent efficiencies[J].International Journal of Refrigeration，2017，82：104-116.