冯新粮,郭津津
FENG Xin-liang,GUO Jin-jin(Tianjin University of Technology

• 1:天津理工大学

摘要(Abstract)：

选取某一大比转速离心通风机为研究对象,分别以等边基元法、不等边基元法和阿基米德螺旋线方程法绘出蜗壳外型线。在三维建模软件CATIA中完成风机实体造型,用F luent进行三维数值模拟,得到详细的风机内部流场。对比以上3种不同的蜗壳绘制方法对通风机流动性能的影响,对计算结果进行了分析并得出了结论。
A high specific speed centrifugal fan was selected as a research subject,respectively,drew the volute lines was drawn by equal edge method,ranging edge method and the Archimedes spiral form equation method.The three-dimensional modeling software CATIA was used to finish the fan solid modeling and the software Fluent was used for three-dimensional numerical simulation,finally getting the detailed internal flow field in the fan.It compared the above three different volute draw methods′ influences on the fan flow performance,analyzing the results and getting a conclusion.

关键词(KeyWords)： 离心通风机;蜗壳型线;数值模拟
centrifugal fan;volute shape;numerical simulation

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 冯新粮,郭津津
FENG Xin-liang,GUO Jin-jin(Tianjin University of Technology

参考文献(References)：

• [1]续魁昌.风机手册[M].北京:机械工业出版社,1999.
• [2]机械工业委员会.风机产品样本[M].北京:机械工业出版社,1988.
• [3]成心德.离心通风机[M].北京:化学工业出版社,2006.
• [4]王福军.计算流体动力学分析-CFD软件原理与应用[M].北京:清华大学出版社,2004.
• [5]孙长辉,刘正先,王斗,等.蜗壳变型线改进离心风机性能的研究[J].流体机械,2007,35(4):1-5.