张金凤;冒杰云;袁寿其;张云蕾;
ZHANG Jin-feng;MAO Jie-yun;YUAN Shou-qi;ZHANG Yun-lei;Research Center of Fluid Machinery Engineering and Technology,Jiangsu University;

• 1:江苏大学流体机械工程技术研究中心

摘要(Abstract)：

以某汽车冷却水泵为研究对象,通过定常流场模拟和试验得到多转速工况下的外特性曲线,二者有较好的一致性:扬程随转速均匀变大,高效区增宽并向大流量区偏移。通过非定常流场模拟获得了不同转速下流道内流线、径向速度和压力脉动等分布特性,并对比分析了蜗壳和叶轮所受轴向力和径向力的变化趋势。结果表明:流体速度值、压力脉动幅值以及受力等随转速有较大变化,说明该泵长期远离高效区运行,存在较大的运行稳定性隐患和节能优化空间。
The performance curves of an automobile cooling pump under multi-speed conditions were obtained by steady simulations and the experiment. Two results were in great agreement with each other: the heads increase evenly with the rotation speed and the high efficient area becomes wider moving towards the larger flow rate. For different rotation speeds,the distribution characteristics of streamlines in impeller,radial speed,and pressure fluctuation et. al were gotten by unsteady simulations. Meanwhile the changes of axial and radial forces in the impeller and the volute were compared and analyzed. The results indicate that the fluid velocity,the amplitude of pressure fluctuation and forces et. al show a great change when the rotation speed varies,which accounts for that this pump works away from the highest efficient point for a long time with a big security risk of operational stability and energy saving optimization potential.

关键词(KeyWords)： 汽车冷却水泵;多转速工况;非定常模拟
automobile cooling pump;multi-speed conditions;unsteady simulations

Abstract:

Keywords:

基金项目(Foundation): 国家科技支撑计划项目(2011BAF14B04);; 国家自然科学基金资助项目(51009072)

作者(Authors): 张金凤;冒杰云;袁寿其;张云蕾;
ZHANG Jin-feng;MAO Jie-yun;YUAN Shou-qi;ZHANG Yun-lei;Research Center of Fluid Machinery Engineering and Technology,Jiangsu University;

参考文献(References)：

• [1]陈次昌,王德军,李秀武,等.发动机冷却水泵及试验装置的研究[J].农业机械学报,1999,30(2):81-83.
• [2]Li-hong L,Xiang-yang X,Fen-zhu J,et al.A new intelligent method for flow regime identification in cooling pump of engine[C].Natural Computation(ICNC),2010 Sixth International Conference on.IEEE,2010,3:1498-1502.
• [3]Elena Cortona,Christopher H Onder.Engine Thermal Management with Electric Cooling Pump[C].SAE Paper 2000-01-0965,2000.
• [4]Hoon Cho,Dohoy Jung,Zoran S Filipi,et al.Application of Controllable Electric Coolant Pump for Fuel Economy And Cooling Performance Improvement[J].Journal of engineering for gas turbines and power,2007,129(1):239-244.
• [5]Andersen M R,Gu Fahua,MacLeod P D.Application and validation of CFD in a turbo-machinery design system[R].Proceedings of the ASME Process Industries Division,2003:21-32.
• [6]Muller N,Einzinger J,Lepach T,et al.Application of a multi-level CFD-technique for the design optimization of hydraulic machinery bladings[R].Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference,2004,(2):601-608.
• [7]周卫华.高效率汽车水泵的设计研究[D].北京:清华大学,2011.
• [8]刘婷婷,王彤,杨波,等.汽车水泵性能三维数值模拟及结构改进[J].工程热物理学报,2009,30(6):961-963.
• [9]刘静.汽车水泵的全三维数值模拟及性能预测研究[D].上海:上海交通大学,2013.
• [10]张婷婷,袁寿其,刘建瑞,等.汽车冷却水泵叶轮多参数对其外特性影响分析[J].汽车工程学报,2013,(2):100-105.
• [11]Spence R,Amaral-Teixei J.Investigation into pressure pulsations in a centrifugal pump using numerical methods supported by industrial test[J].Computers&Fluids,2008,37(6):690-700.
• [12]迟秋立,姜元锋,李媛,等.核电厂离心式设备冷却水泵设计[J].流体机械,2012,40(1):50-54.
• [13]司乔瑞,袁寿其,袁建平,等.叶片与隔舌干涉对离心泵性能和压力脉动影响的数值研究[J].流体机械,2012,40(8):31-35.
• [14]赵增樑,程广庆.高稳压性能的核电上充泵出口缓冲器的研制.[J].化工设备与管道,2012,49(2):42-44.
• [15]Johann Friedrich Gülich.Centrifugal Pumps[M].Germany:Springer,2008:508-511.