基于Fluent的多翼式离心风机性能分析Performance Analysis of Multi-blade Centrifugal Fan on Fluent
罗凯;罗鑫;黄闯;张学雷;王晓欣;
LUO Kai;LUO Xin;HUANG Chuang;ZHANG Xue-lei;WANG Xiao-xin;Northwestern Polytechnical University;
摘要(Abstract):
使用Fluent软件对不同工况下的多翼式离心风机进行三维数值模拟,研究风机的典型几何参数对其流噪声和风量的影响规律;采用Coupled耦合算法结合MUSCL离散格式、定常RANS方程组求解风机内流场;采用FW-H声学模型结合大涡模拟计算风机流噪声。结果表明:变工况计算结果与试验值吻合,风机的蜗舌半径、叶片数、叶片进口安放角对风机的风量和流噪声均有一定的影响。本文的研究成果可以为多翼式离心风机的优化设计提供参考。
The 3-D fluid in multi-blade centrifugal fan is numerically simulated by software Fluent. The influence of typical geometric parameters to fan's flow and noise is studied. The Coupled algorithm,the MUSCL discretization scheme and the steady RANS equations are used to solve the flow field of the fan. This paper combines FW-H acoustic model with the large eddy simulation to calculate the flow noise of the fan. The results indicate that the numerical data of diffierent operating conditions are in good agreement with the experimental results. The volute tongue radius,the number of blades and the blade inlet angle all have great influence on flow and noise of the Multi-blade centrifugal fan. The research results of this paper can provide a reference to the optimal design of multi-blade centrifugal fan.
关键词(KeyWords):
离心风机;流噪声;几何参数
multi-blade centrifugal fan;flow noise;geometric parameters
基金项目(Foundation): 长安大学公路养护装备国家工程实验室开放项目(2013G1502048)
作者(Authors):
罗凯;罗鑫;黄闯;张学雷;王晓欣;
LUO Kai;LUO Xin;HUANG Chuang;ZHANG Xue-lei;WANG Xiao-xin;Northwestern Polytechnical University;
参考文献(References):
- [1]曹亚裙,陈建,王灿星,等.油烟机用多叶离心通风机内部流动的数值模拟[J].机电工程,2009,26(6):38-40.
- [2]张素梅,郭培红,温小萍,等.多翼离心风机CFD分析及参数优化设计[J].风机技术,2011,(4):40-43.
- [3]徐辰,杨爱玲,毛义军.离心风机噪声预测方法的进展与分析[J].流体机械,2011,39(7):42-47.
- [4]赵婷,赵忖,任刚,等.倾斜蜗舌对离心风机降噪影响的试验研究[J].流体机械,2012,40(3):8-14.
- [5]宋虎堂,李培宁.蜂窝紧凑结构螺旋板换热器[J].压力容器,2010,27(4):17-19.
- [6]谢少军,潘柏松,陈栋栋,等.基于试验设计法的风机叶片铺层结构分析及优化[J].机电工程,2012,29(2):41-44.
- [7]李娜.徐政.PSS/E中的双馈风机模型[J].机电工程,2012,29(9):24-28,17.
- [8]王福军.计算流体动力学分析CFD软件原理与应用.[M].北京:清华大学出版社,2004.
- [9]游斌,Elhadi E E,谢军龙,等.多翼离心风机的三维数值分析[J].工程热物理学报,2003,24(3):419-422.
- [10]叶舟,王企鲲,郑胜.离心通风机蜗舌及出口流场的数值模拟分析[J].风机技术,2008,(5):15-19.
- [11]赵云波,王宗明,兰永亮,等.基于质量进口边界的风机流场数值模拟[J].风机技术,2010,(3):20-28.
- [12]方开翔,李豪杰,高慧.基于Fluent 6.0的风机流场模拟与噪声预估[J].江苏科技大学学报,2008,22(4):42-47.
- [13]YAN H H,WEI XY,XIU G Y.Numerical simulation of theflow-field and performance of a micro-flowrate centrifugal compressor impeller[J].Hangkong Dongli Xuebao/Journal of Aerospace Power,2008,23(10):1896-1902.
- [14]胡记超,崔晓钰,纪志国,等.微型离心风机内部流场的三维模拟与分析[J].上海理工大学学报,2010,32(3):220-223.
- [15]杜功焕,朱哲民,龚秀芬.声学基础[M].南京:南京大学出版社,2001,3.
- [16]江国和,李涛涛.基于Fluent的涡轮增压器压气机流场模拟与噪声分析[J].中国水运,2011,11(7):78-81.
- [17]李晓东,桂幸民.不同CFD软件对某风扇压气机数值模拟的对比研究[C].热机气动热力学学术会议,绍兴:中国工程热物理学会,2008,22-26.