王掩刚,赵龙波,国睿,任思源
WANG Yan-gang,ZHAO Long-bo,GUO Rui,REN Si-yuan(Northwestern Polytechnical University

• 1:西北工业大学

摘要(Abstract)：

详细分析了Betz理论和Schm itz理论的优势和不足,给出了对旋式水平轴风力机设计流程,设计了小型双转子对旋式风力机,结合三维数值分析手段对所设计的风力机进行了设计工况的流动分析,研究结果表明:(1)Schm itz理论相对合理,但仍然存在缺陷,依据该理论所计算的翼型根部安装角过大;(2)双转子对旋式风力机在工程上是可实现的,本文所设计的风力机基本达到设计目标,下游风轮输出功率大于上游风轮;(3)设计工况下所设计的双转子对旋风力机两排叶片吸力面没有出现分离,压力梯度控制合理,均工作于比较理想的气动状态下。
On the basis of investigating the advantages and disadvantages of Betz and Schmitz theory,the procedure of a new wind machine which is a horizontal axial counter-rotating wind turbine has been shown.A mini-type counter-rotating wind turbine has been designed successfully by this method.The performance and detailed flow structure of the designed machine has been obtained by three dimensional numerical simulation.The results show that:(1)Compared with the Betz theory,Schmitz theory is reasonable which could be used in the design process of counter-rotating wind turbine.However there are some faults of Schmitz theory because the setting angle near the hub section of wind rotor is larger when Schmitz theory is used.(2)Counter-rotating wind turbine could be attainable in engineering.The designed wind turbine in this paper achieved the aim and the power of downstream rotor is greater than the upstream rotor's.(3)There is no separation on the suction side when the counter-rotating wind turbine is working under the designed condition,the pressure gradient is reasonable.

关键词(KeyWords)： 对旋风力机;Schmitz理论;设计流程;数值模拟
counter-rotating wind turbine;schmitz theory;design procedure;numerical simulation

Abstract:

Keywords:

基金项目(Foundation): 陕西省自然科学基金项目(2011JQ7019);; 西北工业大学创新基金(2008KJ01004)

作者(Author): 王掩刚,赵龙波,国睿,任思源
WANG Yan-gang,ZHAO Long-bo,GUO Rui,REN Si-yuan(Northwestern Polytechnical University

参考文献(References)：

• [1]刘大响,程荣辉.世界航空动力技术的现状及发展动向[J].北京航空航天大学学报,2002,28(5):490-496.
• [2]蔡睿贤.有关对转涡轮基本设计与应用的进一步思考[J].航空动力学报,2002,16(3):193-198.
• [3]王掩刚,刘波,陈云永,等.双级对转压气机流场分析研究[J].西北工业大学学报,2006,24(1):97-101.
• [4]Sharma P B,Adekoya A.A Review of Recent Re-search on Counter Rotating Axial Flow CompressorStage[J/OL].ASME 96-GT-254,1996.
• [5]廖明夫,Gasch R,Twele J.风力发电技术[M].西安:西北工业大学出版社,2009.
• [6]董礼,廖明夫,井延伟.风力机叶片气动设计及偏载计算[J].太阳能学报.2009,30(1):122-128.
• [7]Profili.exe.http://www.profili2.com[EB/OL].