孟明站,杨帅,吴大转,郑枫,潘燚
MENG Mingzhan,YANG Shuai,WU Dazhuan,ZHENG Feng,PAN Yi

• 1:浙江大学能源工程学院
• 2:西安精密机械研究所昆明分部

摘要(Abstract)：

为了研究水力测功机瞬态启动过程的加载特性，采用三维计算流体动力学(CFD)方法，通过建立水力测功机的三维全流域模型，使用网格滑移技术对水力测功机启动过程进行模拟，分析了不同加载时间和加载方式下水力测功机的瞬态性能。研究结果表明，水力测功机瞬态启动过程流场相比于稳态过程具有明显的滞后性。且启动加速度越大，加载时间越短，流场的滞后效应越明显，同转速下的吸收扭矩越小。
In order to study the loading characteristics of the hydraulic dynamometer during the transient start-up process，the three-dimensional computational fluid dynamics(CFD) method was adopted.A complete three-dimensional full-flow domain model of the hydraulic dynamometer was established.Then the grid slip technology was used to simulate the startup process of the hydraulic dynamometer in order to analyze the transient performance of the hydraulic dynamometer at different loading times and under loading methods.The research results show that the flow field in the transient startup process of the hydraulic dynamometer has obvious hysteresis compared with the steady-state process.And the larger the starting acceleration，the shorter the loading time，more obvious the hysteresis effect of the flow field，and the smaller the absorbed torque at the same rotational speed.

关键词(KeyWords)： 水力测功机;数值模拟;滞后效应;启动特性
hydraulic dynamometer;numerical simulation;hysteresis;startup characteristics

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51839010)

作者(Author): 孟明站,杨帅,吴大转,郑枫,潘燚
MENG Mingzhan,YANG Shuai,WU Dazhuan,ZHENG Feng,PAN Yi

参考文献(References)：

• [1]刘怀，张旺，于秀范.水力测功器在内燃机检测中的应用[J].机械工程师，1994(6)：43-44.LIU H，ZHANG W，YU X F.Application of hydraulic dynamometer on internal combustion engine detection[J].Mechanical Engineer，1994(6)：43-44.
• [2]RAINE J K，HODGSON P G.Computer simulation of a variable fill hydraulic dynamometer；Part 1：torque absorption theory and the influence of working compartment geometry on performance[Z].London，England：SAGE Publications，1991，205：155-163.
• [3]HODGSON P G，RAINE J K.Computer simulation of a variable fill hydraulic dynamometer：Part 2：steady state and dynamic open-loop performance[J].Proceedings of the Institution of Mechanical Engineers.Part C，Journal of Mechanical Engineering Science，1992，206(1)：49-56.
• [4]杜丹丰，马岩.水力测功器制动扭矩的影响因素[J].北华大学学报(自然科学版)，2010，11(2)：186-188.DU D F，MA Y.Influencing factor of hydraulic dynamometer brake torque[J].Journal of Beihua University(Natural Science)，2010，11(2)：186-188.
• [5]姚新芳.水力测功机内部流场分析及参数匹配研究[D].武汉：武汉理工大学，2014.YAO X F.Research on flow field analysis and parameter matching of hydraulic dynamometer[D].Wuhan：Wuhan University of Technology，2014.
• [6]TSUKAMOTO H，OHASHI H.Transient characteristics of a centrifugal pump during starting period[J].ASME Journal of Fluid Engineering，1982，104(1)：6-13.
• [7]TSUKAMOTO H，MATSUNAGA S，YONEDA H.Transient characteristics of a centrifugal pump during stopping period[J].ASME Journal of Fluid Engineering，1986，108(4)：392-399.
• [8]LEFEBVRE P J，BARKER W P.Centrifugal pump performance during transient operation[J].ASME Journal of Fluid Engineering，1995，117(2)：123-128.
• [9]DAZIN A，CAIGNAERT G，BOIS G.Transient behavior of turbomachineries：applications to radial flow pump startups[J].ASME Journal of Fluids Engineering，2007，129(11)：1436-1444.
• [10]吴大转，焦磊，王乐勤.不同启动加速度下离心泵瞬态水力性能的试验研究[J].工程热物理学报，2008(1)：62-64.WU D Z，JIAO L，WANG L Q.Experimental study on transient performance of centrifugal pump under different starting acceleration[J].Journal of Engineering Thermophysics，2008(1)：62-64.
• [11]李志峰.离心泵启动过程瞬态流动的数值模拟和实验研究[D].杭州：浙江大学，2009.LI Z F.Numerical simulation and experimental study on the transient flow in centrifugal pump during starting period[D].Hangzhou：Zhejiang University，2009.
• [12]李志峰，吴大转，王乐勤，等.离心泵启动过程瞬态特性的试验[J].排灌机械工程学报，2010，28(5)：389-393.LI Z F，WU D Z，WANG L Q，et al.Experiment on instantaneous characteristics in centrifugal pump during startup period[J].Journal of Drainage and Irrigation Machinery Engineering，2010，28(5)：389-393.
• [13]李志峰，吴大转，戴维平，等.离心泵启动过程瞬态特性与流动的实验研究[J].工程热物理学报，2010，31(12)：2019-2022.LI Z F，WU D Z，DAI W P，et al.Experimental study on the transient characteristics and flows in a centrifugal pump during starting period[J].Journal of Engineering Thermophysics，2010，31(12)：2019-2022.
• [14]刘宇宁，王秀勇，刘志远，等.多级离心泵水力性能数值模拟精度影响因素研究[J].流体机械，2020，48(10)：41-47.LIU Y N，WANG X Y，LIU Z Y，et al.Study on the influencing factors of numerical simulation accuracy for the performance prediction of multistage centrifugal pump[J].Fluid Machinery，2020，48(10)：41-47.
• [15]韩笑笑，苏瑞，赵恒文，等.基于Pumplinx的螺杆泵性能优化仿真研究[J].流体机械，2021，49(4)：55-59.HAN X X，SU R，ZHAO H W，et al.Study on simulation of performance optimization of screw pump based on Pumplinx[J].Fluid Machinery，2021，49(4)：55-59.
• [16]魏立新，初勇强，刘芳，等.油田站场输油泵模糊安全评价[J].流体机械，2021，49(3)：68-73.WEI L X，CHU Y Q，LIU F，et al.Fuzzy comprehensive safety evaluation of oil transfer pump in oilfield station[J].Fluid Machinery，2021，49(3)：68-73.
• [17]李靖晗，胡永海，阮鹏程，等.对转轴流泵的设计与数值分析[J].流体机械，2021，49(2)：37-42.LI J H，HU Y H，RUAN P C.Design and numerical analysis of the counter-rotating axial flow pump[J].Fluid Machinery，2021，49(2)：37-42.
• [18]连加俤，潘国军，朱泽飞.弹性体转子泵压力特性数值分析与试验[J].排灌机械工程学报，2020，38(10)：985-990.LIAN J D.PAN G J，ZHU Z F.Numerical analysis and verification of pressure characteristics of elastomeric rotor pumps[J].Journal of Drainage and Irrigation Machinery Engin，2020，38(10)：985-990.
• [19]梁兴，张剑焜，李志红，等.超驼峰工况下轴流泵站事故停泵防护方案寻优[J].排灌机械工程学报，2020，38(10)：1010-1015.LIANG X，ZHANG J K，LI Z H，et al.Optimizing protection scheme for accident shutdown of axial flow pumping station under super hump conditions[J].Journal of Drainage and Irrigation Machinery Engin，2020，38(10)：1010-1015.
• [20]汪建，杨帅，吴大转，等.基于三维CFD方法的管路瞬变流特性研究[J].流体机械，2019，47(4)：6-13.WANG J，YANG S，WU D z，et al.Investigation on the characteristics of pipeline transient flow based on three-dimensional CFD method[J].Fluid Machinery，2019，47(4)：6-13.