秦炎锋,魏中坤,关凯书
QIN Yan-feng,WEI Zhong-kun,GUAN Kai-shu

• 1:华东理工大学

摘要(Abstract)：

采用化学成分分析、力学性能测试、断口扫描电镜观察和金相观察等失效分析手段,对压缩机供液泵的叶片断裂原因进行分析,并对未断裂叶片根部进行表面着色探伤和金相组织观察。结果表明:叶片断裂原因是因为根部存在应力腐蚀裂纹,这些裂纹成为疲劳断裂的起源位置。
The fracture of liquid ring compressor service liquid pump blade was analyzed by means of chemical composition analyzed,mechanical property test,SEM and metallogriphic,and the root of whole blade was analyzed by means of surface penetrant and metallographic. The result shows that,the cause of fracture blade was the existence of the stress- corrosion crack,and the crack caused the main courses of fatigue fracture.

关键词(KeyWords)： 供液泵叶片;疲劳断裂;失效分析;应力腐蚀裂纹
service liquid pump blade;failure analysis;fatigue fracture;stress corrosion crack

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 秦炎锋,魏中坤,关凯书
QIN Yan-feng,WEI Zhong-kun,GUAN Kai-shu

参考文献(References)：

• [1]吴望周.化工设备断裂失效分析基础[M].南京:东南大学出版社,1991.
• [2]王大成,陈志静,周海强.除焦用高压水泵轴断裂失效分析[J].流体机械,2012,40(5):48-52.
• [3]魏中坤,秦炎锋,关凯书.真空泵叶片断裂失效分析[J].流体机械,2013,41(7):55-57.
• [4]孙斌,许安俊.高压止回阀断裂失效分析[J].压力容器,2012,29(1):67-72.
• [5]尤兆宏,陈鹏,关凯书.高压止回阀断裂失效分析[J].压力容器,2012,29(10):60-63.
• [6]孙海生,关凯书,欧阳枭雄.焊接管道腐蚀穿孔失效研究[J].化工设备与管道,2013,51(1):60-63.
• [7]刘正义,吴连生,许麟康,等.机械装备失效分析图谱[M].广州:广东科技出版社,1990.
• [8]陆世英.不锈钢的应力腐蚀事故分析与应力腐蚀不锈钢[M].北京:原子能出版社,1985.
• [9]Martins R F,Branco C M,et al.A Failure Analysis of Exhauxt System for Naval Gas Turbine[J].Part I:Failure Life Assessment.J.Eng.Failure Analysis,2009,16:1314-1323.