舒信伟,陈婷
SHU Xin-wei,CHEN Ting

• 1:上海鼓风机厂有限公司

摘要(Abstract)：

运用数值求解叶轮机械内部三维粘性流场的方法,对工程上常用的某带分流叶片的离心压缩机叶轮及后接有叶扩压器的内部流动和性能进行数值研究。通过求解分流叶片处于不同周向位置和其前缘处于不同流向位置时级的流场,得到了对应的内部流场和压力、效率与流量的性能曲线。结合对级性能曲线和内部流场的详细分析,结果表明:分流叶片处于不同的周向位置和其前缘处于不同流向位置时对级的内部流场和性能曲线影响很大,分流叶片中间叶高处前缘位置位于50%左右和周向位置距长叶片吸力面一侧1/10栅距左右,级性能较佳。
The flowfield and performance of a centrifugal impeller and vaned diffuser was solved by numerical simultion of the3 D viscous flowfield inside the stage. The inner flowfields and preformance curves of 40 stages,varied by splitter circumferential position and splitter's leading edge streamwise position,were obtained. Detailed analysis of these flowfields and performance curves was conducted. Result indicates that the splitter position has a considerable effect on the stage flowfield and performance curve,and the stage performance is significantly improved when the mid-span streamwise position of the splitter leading edge is about 50% and the splitter circumferential position is about 1 /10 pitch offset to the main blade's suction side.

关键词(KeyWords)： 分流叶片;离心叶轮机械;数值研究
splitter;centrifugal turbomachinery;numerical investigation

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 舒信伟,陈婷
SHU Xin-wei,CHEN Ting

参考文献(References)：

• [1]Krain H.A study on centrifugal impeller and diffuser flow[J].ASME Journal of Engineering for Power,1981,103:68826-97.
• [2]Krain H,Hoffman W.Verification of an Impeller Design by Laser Measurements and 3D-Viscous Flow Calculations[R].ASME Paper,No.89-GT-159,1989.
• [3]屠仁涌.带长短叶片离心叶轮的三元流场[J].上海交通大学学报,1988,22(4):105-109.
• [4]Hiroyuki Miyamoto,Yukitoshi Nakashima.Effects of splitter blades on the flows and characteristics in centrifugal impeller[J].JSME International SeriesⅡ,1992,35(2):238-246.
• [5]刘瑞韬,徐忠.分流叶片位置对高转速离心压气机性能的影响[J].空气动力学,2005,23(1):129-134.
• [6]李红,庄海飞,姜波,等.中浓浆泵湍流发生器叶片型线设计研究[J].流体机械,2014,42(2):22-27.
• [7]田虎楠,王作棠,孙文磊,等.极端高温下风力机叶片的性能分析[J].流体机械,2013,41(9):22,44-46.
• [8]林棋,娄晨.基于差压式孔板流量计的缩径管段流场数值研究[J].压力容器,2014,31(2):33-41.
• [9]卜远远,楚武利.分流叶片周向位置对离心叶轮性能及内部流动的影响[J].流体机械,2011,39(9):16-20.