胡立志,何泽银,彭艳蓉,柴红阳,李德江,刘红梅,曹昱坤
Hu Lizhi,He Zeyin,Peng Yanrong,Chai Hongyang,Li Dejiang,Liu Hongmei,Cao Yukun

• 1:重庆建设汽车系统股份有限公司重庆市汽车热管理系统工程技术研究中心
• 2:重庆交通大学机电与车辆工程学院

摘要(Abstract)：

为降低滑片式压缩机整体动态功耗,自制并搭建压缩机动态功耗测试系统,提出通过动态参数测量的滑片式压缩机动态功耗预估方法,研究压缩机吸气压力、排气压力、压缩机动态扭矩等动态参数分布规律,进而分析压缩机动态扭矩影响因素。研究结果表明,出口压力对扭矩影响较进气压力大,压比对压缩机扭矩影响较小;随着转速增加,波动范围增大,但动态扭矩均值呈降低趋势;通过分析动态扭矩特征及影响因素,可合理控制动态扭矩波动,有效降低压缩机动态功耗。
In order to reduce the overall dynamic power consumption of the sliding vane compressor,a test system for the dynamic power consumption of the compressor was built.A dynamic power consumption prediction method for sliding vane compressor based on dynamic parameter measurement was proposed to study the distribution of dynamic parameters such as suction pressure,exhaust pressure and dynamic torque of the compressor.Then the influence factors of compressor dynamic torque were analyzed.The results show that the outlet pressure has more influence on the torque than the inlet pressure and the pressure ratio has less influence on the compressor torque.With the increase of rotating speed,the fluctuation range increased,but the mean dynamic torque decreased.By analyzing dynamic torque characteristics and influencing factors,the dynamic torque fluctuation could be reasonably controlled to effectively reduce dynamic power consumption of the compressor.

关键词(KeyWords)： 滑片式压缩机;动态功耗;测试方法;影响因素
rotary vane compressor;dynamic power consumption;experimental method;influence factor

Abstract:

Keywords:

基金项目(Foundation): 重庆市自然科学基金项目(cstc2019jcyj-msxmX0799);; 重庆市技术创新与应用发展专项项目(cstc2019jscx-msxmX0038)

作者(Author): 胡立志,何泽银,彭艳蓉,柴红阳,李德江,刘红梅,曹昱坤
Hu Lizhi,He Zeyin,Peng Yanrong,Chai Hongyang,Li Dejiang,Liu Hongmei,Cao Yukun

参考文献(References)：

• [1]董旭慧.空压机功耗检测分析[J],机电工程技术,2018,47(10):161-163.
• [2]陶平安.旋叶式压缩机工作过程的数值模拟[D].重庆:重庆大学,2009.
• [3]张斌.滑片式压缩机自动测试平台的设计与研究[D].沈阳:东北大学,2008.
• [4]边娟鸽.基于PLC与MCGS的定量灌装控制系统设计与实现[J].包装与食品机械,2018,36(3):65-68.
• [5]陈宁,张功学,王德雨,等.基于能量法的弦波式激励运输包装系统仿真研究[J].包装与食品机械,2018,36(3):31-35.
• [6]杨夏威,陈松山,于贤磊,等.大型灌溉管网配压式进排气阀排气特性[J].排灌机械工程学报,2018,36(10):975-980.
• [7]汤胜楠,朱勇,李伟,等.机械系统实测信号预处理方法研究现状与展望[J].排灌机械工程学报,2018,36(9):822-828.
• [8]刘美平,刘雪林,潘柳.雨流计数法在PIPESTRESS软件中的实现方法[J].压力容器,2018,35(4):50-53.
• [9]叶建军,郑津洋,丁会明,等.基于互联网信息技术的深冷容器应变强化控制系统[J].压力容器,2018,35(3):1-7.
• [10]范继珩,冯毅.管间距对翅片油冷却器传热及阻力性能的影响[J].压力容器,2018,35(8):16-23.
• [11]王建吉,刘涛,孙旖彤,等.涡旋压缩机齿顶密封条摩擦磨损性能的研究[J].流体机械,2018,46(4):1-5.
• [12]张瑜,张桥.考虑压缩比和进口温度的多级压缩总能耗分析[J].计算机与应用化学,2018,32(9):711-718.
• [13]魏新利,汤本凯.降低压缩机吸气温度对排气量和功耗的影响分析[J].化肥工业,2012,39(3):29-32.
• [14]杨忠亮.螺杆式空气压缩机能耗损失与节能途径[J].设备管理与维修,2018,435(21):167-168.
• [15]王满,潘树林,广柯平,等.循环压缩机气阀功耗的工程计算与应用[J].石油化工设备技术,2016,37(5):37-39.
• [16]潘树林,广柯平,王满,等.压缩机吸气阀与排气阀的功耗对比[J].流体机械,2016,44(4):49-52.
• [17]卢迪,刘强,王君.往复压缩机的能耗模型与影响因素分析[J].压缩机技术,2016(6):11-15.
• [18]彭庆红,杜群贵.转速对电动车热泵空调系统性能影响的仿真分析[J].机械设计与制造,2015(3):35-38.
• [19]王晓燕,焦卫东,朱利民.变工况运行的制冷压缩机功率消耗的定量关系式研究[J].压缩机技术,2019(1):6-10.
• [20]Lee S,Shim J,Kim K C.Development of capacity modulation compressor based on a two-stage rotary compressor-Part Ⅱ:Performance experiments and P-Vanalysis[J].International Journal of Refrigeration,2016,61:82-99.
• [21]Bianchi G,Cipollone R.Friction power modeling and measurements in sliding vane rotary compressors[J].Applied Thermal Engineering,2015,84:276-285.