车占富,杨敏官,冯浪,康灿,高波
CHE Zhan-fu,YANG Min-guan,FENG Lang,KANG Can,GAO Bo(Jiangsu University

• 1:江苏大学

摘要(Abstract)：

在直径为340mm的平底圆筒搅拌槽内,利用PIV和固体激光发生器对固相体积浓度为20%的固液两相体系进行了试验。结果发现,与中心搅拌相比,偏心搅拌时涡轴与搅拌轴倾斜,槽内流体的动力学扰动增大,破坏了中心搅拌时流体流动的一致性。偏心率越大,槽内流体的轴向流动愈明显,并形成一个范围较大的单循环流动结构。偏心搅拌时,颗粒的浓度分布较中心搅拌时均匀得多,颗粒的悬浮高度随偏心率的增大而增大,但临界悬浮转速和功率消耗也随之增大,试验得出最佳偏心率为E=0.4。
Solid-liquid flow field in eccentrically stirred tank was investigated by PIV(Particle Image Velocimetry) and solid-state laser generator.An unbaffled,flat bottom,cylindrical glass vessel of diameter 340mm equaling to the liquid height was used.The results show that,the vortices inclined with the vertical plane in eccentric stirred tank,which the turbulent kinetic energy is significant so that they break the flow field coherence,compared with concentric stirred tank.Axial flow is evident and formed a large scale single loop flow field with high eccentricity.Particle concentration has more well-distributed in eccentric stirred tank.The height suspended particles with eccentricity increases,although it lifts the critical suspension speed and power consumption.The effect is best when the eccentricity is equal to 0.4.

关键词(KeyWords)： 搅拌槽;偏心率;固液悬浮;PIV;功率消耗
stirred tank;eccentricity;solid-liquid suspension;PIV;power consumption

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(50776040);; 江苏高校优势学科建设工程资助项目(苏财教[2011]8号)

作者(Author): 车占富,杨敏官,冯浪,康灿,高波
CHE Zhan-fu,YANG Min-guan,FENG Lang,KANG Can,GAO Bo(Jiangsu University

参考文献(References)：

• [1]来永斌,杨敏官.固液搅拌槽内轴向流动特性的实验研究[J].煤矿机械,2010,31(10):43-45.
• [2]Alvarez M M,Arratia P E,Muzzio F J.Laminar mixingin eccentric stirred tank systems[J].Can.J.Chem.Eng.,2002,80(4):546-557.
• [3]Kramers H,Baars G M,Knoll W H.A comparativestudy on the rate of mixing in stirred tanks[J].Chem.Eng.Sci.,1953,2(1):35-42.
• [4]Woziwodzki S,Broniarz-Press L,Ochowiak M.Effectof eccentricity on transitional mixing in vessel equippedwith turbine impellers[J].Chem.Eng.Res.Des.,2010,511:1-8.
• [5]Galletti C,Brunazzi E.On the main flow features andinstabilities in an unbaffled vessel agitated with an ec-centrically located impeller[J].Chemical EngineeringScience,2008,63:4494-4505.
• [6]胡银玉,刘喆,杨基础,等.偏心搅拌反应器内的液相混合行为[J].化工学报,2010,61(10):2517-2522.
• [7]马维丽,赵家炜,曹文辉.聚合反应器内冷管组与壳体的组装[J].压力容器,2011,28(10):56-59.
• [8]Assirelli M,Bujalski W,Eaglesham A,et al.Macro-and micromixing studies in an unbaffled vessel agitatedby a Rushton turbine[J].Chemical Engineering Sci-ence,2008,63(1):35-46.
• [9]Assirelli M.Bujalski W.Eaglesham A,et al.Macro-and micromixing studies in an unbaffled vessel agitatedby a Rushton turbine[J].Chemical Engineering Sci-ence.2008,63:35–46.
• [10]张凤涛,刘芳,黄雄斌.高固含搅拌槽内临界离底悬浮转速的数值模拟[J].过程工程学报,2007,7(3):439-444.
• [11]王志坚,佟亮,李璐璐,等.基于CFD的离心泵内部三维流动数值模拟和性能预测[J].流体机械,2012,40(6):14-18.
• [12]黄思,苏丽娟.基于CFD对旋喷泵两种叶片结构的数值模拟及性能比较[J].流体机械,2010,38(6):21-24.
• [13]钟丽,黄雄斌,贾志刚.固-液搅拌槽内颗粒离底悬浮临界转速的CFD模拟[J].北京化工大学学报,2008,8(6):1064-1069.
• [14]杨锋苓,周慎杰,杨翠勋,等.偏心搅拌槽固液悬浮特性[J].过程工程学报,2008,8(6):1064-1069.
• [15]银剑中,程绍杰,贾凌云,等.搅拌式反应器内固-液两相悬浮特性的CFD模拟[J].应用科技,2009,36(11):11-16.