吴波,陈志,李建明,蒋琳,刘廷超
WU Bo,CHEN Zhi,LI Jian-ming,JIANG Lin,LIU Ting-chao

• 1:四川大学

摘要(Abstract)：

基于CFD数值仿真结合单因素试验和正交试验,研究螺旋角、槽深、槽数、槽宽比和槽长坝长比对螺旋槽干气密封性能的影响。单因素试验揭示开启力和泄漏量随各参数的变化规律,并为正交试验因素水平合理选择提供依据。由正交试验得到分别以开启力、气膜刚度和刚漏比为目标函数的最优端面结构。由极差分析得到各结构参数对密封性能影响的主次顺序,槽长坝长比是影响开启力和泄漏量的最主要因素,而气膜刚度和刚漏比主要由槽深和螺旋角决定。
The effect of spiral angle,groove depth,groove number,groove width ratio and groove length ratio on the sealing performance of a spiral groove dry gas seal was studied by single factor experiments followed by orthogonal experiments based on CFD numerical simulation method. The results from single factor experiments reveal the variation law of opening force and leakage with each structure parameter and provide reasonable guide for the choice of factor level in orthogonal experiments. The optimal structure parameters with opening force,gas film stiffness and the ratio of stiffness to leakage as objective function were respectively obtained by orthogonal experiments. The effect of main factors of the end face structure parameter on sealing performance was got by range analysis. Groove length ratio is the most important parameter for opening force and leakage,and gas film stiffness and the ratio of stiffness to leakage are mainly determined by groove depth and spiral angle.

关键词(KeyWords)： CFD;干气密封;正交试验;极差分析;密封性能
CFD;dry gas seal;orthogonal experiment;range analysis;sealing performance

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 吴波,陈志,李建明,蒋琳,刘廷超
WU Bo,CHEN Zhi,LI Jian-ming,JIANG Lin,LIU Ting-chao

参考文献(References)：

• [1]Wasser J R.Dry seal technology for rotating equipment[J].Lubrication Engineering,1994,50(3):247-252.
• [2]Kowalski C A,Basu P.Reverse rotation capability of spiral groove gas face seals[J].Tribology Transactions,1995,38(3):549-556.
• [3]顾永泉.机械端面密封[M].东营:石油大学出版社,1994.
• [4]Zikelback N.Parametric Study of Spiral Groove Gas Face Seals[J].J Tribol Trans,2000,43:337-343.
• [5]Marca Tulio C,Faria.Pressure dam in fluence on the performance of gas face seals[J].Tribology Internationla,2012,(47):134-141.
• [6]常小军,胡伟,丁雪兴,等.干气密封槽型参数的优化及其数值模拟[J].化工机械,2011,38(4):453-456.
• [7]蒋小文,顾伯勤.螺旋槽干气密封端面间气膜特性[J].化工学报,2005,56(8):1419-1425.
• [8]陈志,李建明.干气密封的流动数值模拟[J].四川大学学报(工程科学版),2005,37(3):133-137.
• [9]马媛媛,彭旭东,白少先,等.双向旋转树型密封端面气膜动压特性[J].流体机械,2012,40(1):13-16.
• [10]刘坤,白少先,李盛云,等.经向变深雁形槽干气密封开启性能研究[J].流体机械,2013,41(6):24-29.
• [11]张勤昭,王宏,林建树.螺旋槽干气密封对流传热系数研究[J].流体机械,2012,40(9):26-31.
• [12]喻建良,张忠华,闫兴清,等.高温下螺栓-法兰-垫片系统密封性能研究[J].压力容器,2012,29(5):8-12.
• [13]宋文博.压缩机平衡盘干气密封的研究[D].北京:北京化工大学,2004.
• [14]Lubrication characteristics of spiral groove liquid seals for use in the carrier of a vane-type external LPG fuel pump[J].International Journal of AutomotiveTechnology,2011,(2):233-241.
• [15]刘亚莉,张强,赵丽丽,等.螺旋槽结构参数对干气密封开启力和气膜刚度的影响[J].郑州轻工业学院学报(自然科学版),2011,26(2):90-93.
• [16]高钰.螺旋槽干气密封的性能研究及优化设计[D].成都:四川大学,2012.
• [17]彭旭东,谭丽丽,盛颂恩,等.带内环槽的螺旋槽干式气体端面密封的静压性能[J].摩擦学报,2008,28(6):507-511.
• [18]彭旭东,黄莉,白少先,等.雁型槽干式气体端面密封性能的数值分析[J].化工学报,2010,61(12):3193-3199.