切流式双入口气液旋流分离器内的流动分析Analysis of Internal Flow in Two-inlet Gas-liquid Tangential Cyclone Separator
王振波,张世林,马艺,尹燕尼,金有海
WANG Zhen-bo1,ZHANG Shi-lin2,MA Yi1,YIN Yan-ni1,JIN You-hai1(1.China University of Petroleum(East of China)
摘要(Abstract):
针对切流式双入口气液旋流分离器的内部流动特征,利用Fluent软件进行计算分析,重点对分离器内部流动状态及湍流度进行分析,并考察入口流速对主要分离空间流动参数的影响。结果表明,切流式气液分离器内主要分离空间呈明显的组合涡分布,并且轴向零速包络面呈明显柱形,但分离器入口处能耗较大,排气管入口附近紊流现象严重,当入口流速增大时尤为明显。计算结果对气液旋流分离器的结构优化与性能预测具有指导意义。
The internal flow field in two-inlet gas-liquid tangential cyclone separator was studied by numerical calculation.Fluent software was adopted to simulate the flow characteristic and turbulence of gas-liquid separator.And influences of inlet velocity on flow parameters were presented.The results show that the combined vortex is obvious and line of zero vertical velocity appears to be cylindricality in main separation space of cyclone separator.However,high energy loss generates near the inlet of separator,and there is heavy turbulence near the entrance of exhaust pipe,especially for the increase of inlet velocity.This study is of guiding significance in structural improvement and performance prediction of gas-liquid cyclone separator.
关键词(KeyWords):
气相流动;数值模拟;旋流分离器;能量损失;轴向零速包络面
gas flow;numerical simulation;cyclone separator;energy loss;LZVV
基金项目(Foundation):
作者(Author):
王振波,张世林,马艺,尹燕尼,金有海
WANG Zhen-bo1,ZHANG Shi-lin2,MA Yi1,YIN Yan-ni1,JIN You-hai1(1.China University of Petroleum(East of China)
参考文献(References):
- [1]Masnadi M S,Grace J R,Elyasi S,et al.Distributionof multi-phase gas-solid flow across identical parallelcyclones:modeling and experimental study[J].Sepa-ration and Purification Technology,2010,72(1):48-55.
- [2]张慢来,冯进,刘孝光,等.一种新型离心式气液分离器分离性能的数值模拟与试验研究[J].流体机械,2007,35(8):9-13.
- [3]金向红,金有海,王振波,等.导叶角度对轴流式气液旋流器分离性能的影响[J].石油机械,2008,36(2):1-5.
- [4]王尊策,高春阳,李森,等.气液分离旋流器试验研究[J].石油矿场机械,2008,37(6):70-74.
- [5]徐继润,罗茜.水力旋流器流场理论[M].北京:科学出版社,1998.
- [6]Wang B,Xu D L,Chu K W,et al.Numerical study ofgas-solid flow in a cyclone separator[J].AppliedMathematical Modelling,2006,30:1326-1342.
- [7]Ng S Y,Priestman G H,Allen R W K.Investigation offlooding,re-entrainment and grade efficiency in axialflowcyclones[J].Chemical Engineering Research andDesign,2006,84(10):884-894.
- [8]郭鸿志.传输过程数值模拟[M].北京:冶金工业出版社,1998.
- [9]Safikhania H,Akhavan-Behabadia M A,Nariman-Za-dehb N,et al.Modeling and multi-objective optimiza-tion of square cyclones using CFD and neural networks[J].Chemical Engineering Research and Design,2010,89(3):1-9.
- [10]Safikhani H,Akhavan-Behabadi M A,Shams M,etal.Numerical simulation of flow field in three typesof standard cyclone separators[J].Advanced Pow-der Technology,2010,21(4):435-442.
- [11]王福军.计算流体动力学—CFD软件原理与应用[M].北京:清华大学出版社,2004.
- [12]Movafaghian S,Jaua-Marturet J A,Mohan R S,et al.The effects of geometry,fluid properties and pressureon the hydrodynamics of gas-liquid cylindrical cycloneseparators[J].International Journal of MultiphaseFlow,2000,26(16):999-1018.
- [13]赵庆国,马重芳,薛敦松.操作参数和流体物性参数对水力旋流器的迁移率的影响[J].高校化学工程学报,2001,15(4):328-332.