三偏心蝶阀流阻特性对比试验研究Experimental Research on the Flow Resistance Characteristics of the Tri-eccentric Butterfly
刘福生,王宏,张勤昭
Liu Fusheng,Wang Hong,Zhang Qinzhao
摘要(Abstract):
对一种DN650三偏心蝶阀不同开度下的阻力特性进行测试试验,随后加工去掉该蝶阀中间一段阀轴,由全轴蝶阀改为双端轴蝶阀,对比测试该蝶阀在不同开度下的阻力特性,试验表明,全开状态流阻系数明显减少,随着阀板关闭,减少幅度降低。为从细节上了解蝶阀流场变化情况,采用CFX对以上2种三偏心蝶阀进行数值模拟,流阻系数模拟值与试验值吻合很好,验证了数值模拟的正确性。
The resistance characteristics test was carried out for a DN650 tri-eccentric butterfly valve with different openings.The middle section of valve shaft was removed so that the butterfly valve was changed from a full-axis type to a double-end-axis type.The comparison test of the resistance characteristics was conducted for the changed valve with different openings.The test results show that the flow resistance coefficients decrease significantly at the full-open position,and the reduction extent decreases with the closure of the valve.In order to understand the flow field change of the two valves in detail,the computational fluid dynamics software CFX was used to simulate the flow resistance coefficients.The simulation results show a good agreement with the experimental values,which verifies the correctness of the numerical simulation.
关键词(KeyWords):
三偏心蝶板;流阻特性;数值模拟;试验研究
tri-eccentric butterfly valve;flow resistance characteristics;numerical simulation;experimental research
基金项目(Foundation): 国家科技重大专项“大型先进压水堆及高温气冷堆核电站”(2008ZX06902-004)
作者(Author):
刘福生,王宏,张勤昭
Liu Fusheng,Wang Hong,Zhang Qinzhao
参考文献(References):
- [1] 宋学官,汪林,姜正浩,等.蝶阀流动特性的数值模拟及分析[J].流体机械,2008,36(5):25-29.
- [2] 蒋建飞,黄树红,王坤.偏心蝶阀不同串联方式的流动阻力特性[J].流体机械,2009,37(2):32-34.
- [3] 刘健,李福堂.基于Fluent的蝶阀三维流动的数值模拟及分析[J].辽宁科技大学学报,2008,31(3-4):277-280.
- [4] 张耀平,马东平,丁天伟,等.超音速大口径蝶阀流场分析及改进[J].阀门,2011(5):34-36.
- [5] 冯卫民,肖光宇,袁波,等.基于数值仿真的蝶阀性能对比分析[J].排灌机械工程学报,2010,28(4):315-319.
- [6] 马丽琼,刘华,伍超,等.蝶阀阻力系数的数值模拟及分析[J].西南民族大学学报(自然科学报),2010,36(5):827-831.
- [7] 宋汉武,吴荣方.蝶阀的流量特性和阻力特性的试验研究[J].发电设备,1995(Z2):3-4.
- [8] 张茂力,朱海青,费宏伟.基于预估油压的安全阀在线校验技术研究[J].压力容器,2017,34(11):76-80.
- [9] 叶志恒,胡春艳,刘建峰,等.基于动网格的蝶阀启闭过程的数值模拟研究[J].流体机械,2018,46(4):29-33.
- [10] 张继伟,雷艳,王剑,等.埋地大口径蝶阀基于刚度、密封性能的最大弯曲载荷研究[J].流体机械,2017,45(10):37-41.
- [11] 徐明阳,龚力群,李效龙.液控缓闭蝶阀流阻特性试验研究[J].辽宁科技大学学报,2008,31(3-4):277-280.
- [12] 张逸芳,王建新,陈巍巍.空气阀门流阻和流量系数测试系统的研制[J].阀门,2007(1):14-16.