徐峰,田海川,孙勇,师涌江
XU Feng,TIAN Hai-chuan,SUN Yong,SHI Yong-jiang(Hebei Institute of Architecture & Civil Engineering

• 1:河北建筑工程学院

摘要(Abstract)：

采用JDJN-60型相变材料,设计并制作了同心套管双程流相变蓄热单元,利用试验手段对蓄热单元在不同工况下的蓄放热性能进行了研究,分析了传热流体进口温度和流量变化对蓄放热过程的影响。研究结果表明:随着传热流体进口温度的提高,蓄热时间不断减少,但流量增加对蓄热过程影响不大。初步掌握了蓄热单元的蓄放热特性,为其工程应用提供参考依据。
A phase change thermal storage unit,in which JDJN-60 was as phase change material(PCM),with bushings between double flow was designed.The thermal performances of the storage unit in different situations were investigated experimentally.The effects of inlet fluid temperature and flow on the process of heat charge and discharge of the storage unit were analyzed.The results show the time for finishing charging is reduced constantly with improving the inlet temperature of heat transfer fluid.But the flow has little effect.The characteristic of heat charge and discharge of the storage unit was gained.The results offer the reference basis for its engineering application.

关键词(KeyWords)： 相变材料;蓄热单元;蓄放热特性
phase change material;thermal storage unit;characteristic of heat charge and discharge

Abstract:

Keywords:

基金项目(Foundation): 河北省教育厅自然科学指令性项目(2009430)

作者(Author): 徐峰,田海川,孙勇,师涌江
XU Feng,TIAN Hai-chuan,SUN Yong,SHI Yong-jiang(Hebei Institute of Architecture & Civil Engineering

参考文献(References)：

• [1]张仁元.相变材料与相变储能技术[M].北京:科学出版社,2009.
• [2]Kenisarin Murat,Mahkamov Khamid.Solar energy stor-age using phase change materials[J].Renewable Ener-gy,2007,11(9):1913-1965.
• [3]吕敏辉,凌祥.肋板式相变蓄热器蓄热性能的试验研究[J].流体机械,2009,37(2):65-68.
• [4]陈忠华,马贵阳,杜明俊,等.针翅管式相变蓄能设备蓄热放热性能的数值模拟[J].流体机械,2010,38(12):64-68.
• [5]朱冬生,徐婷,杨硕,等.管翅式热泵相变储能器的数值模拟[J].流体机械,2011,39(6):53-58.
• [6]张永明,李培宁.纤维环向缠绕复合材料气瓶冲击损伤容限研究[J].压力容器,2011,39(10):18,26-30.
• [7]胡军,董华,周恩泽,等.螺旋盘管式相变储热单元储热性能[J].太阳能学报,2006,27(4):399-403.
• [8]陈超,蹇瑞欢,焦庆影,等.新型定形板状相变材料的蓄/放热特性[J].太阳能学报,2005,27(6):857-862.
• [9]崔海亭,王振辉,郭彦书,等.圆柱形相变蓄热器蓄/放热性能试验研究[J].太阳能学报,2009,30(10):1368-1372.
• [10]杨世铭,陶文铨.传热学[M].北京:高等教育出版社,2006.