流体机械

2019, v.47;No.563(05) 28-32

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Past Issue) | 高级检索(Advanced Search)

球形止回阀关闭过程流固耦合特性研究
Study on Fluid-solid Coupling Characteristics during Spherical Check Valve Closing Process

赵云;胡光忠;文华斌;邹亮;纪博凯;
Zhao Yun;Hu Guangzhong;Wen Huabin;Zou Liang;Ji Bokai;School of Mechanical Engineering, Sichuan University of Science & Engineering;

摘要(Abstract):

针对现有球形止回阀在关闭过程中结构变形较大,采用FLUENT动网格技术与瞬态动力学进行联合仿真,建立球形止回阀三维模型,通过UDF函数对阀后突然停泵,阀芯关闭过程中管路应力应变情况进行分析。结果表明:阀门关闭后,由于水锤原因引起管道内压力升高,管道内的压力随着时间推移而向上游传播,并且随着传播距离的增加管道内压力值越来越小。在此基础上建立监测点对具体位置上材料的Von-mises应力变化分析,得到在阀门关闭初始时刻和即将闭合时刻的变形最大。
With respect to relatively big structural deformation of the existing spherical check valve during the closing process,the FLUENT dynamic mesh technology and transient dynamics were used for the joint simulation. The three-dimensional model of spherical check valve was established,and the stress and strain of the pipeline in the valve core closing process were analyzed through UDF function. The results show that after the valve was closed,due to increased pressure in the pipe caused by water hammer,the pressure in the pipeline was propagated to the upstream side with time,and the pressure in the pipeline became smaller and smaller with the increase of propagation distance. On this basis,monitoring points were established to analyze the change of the Von-mises stress of the material on the specific locations,and the maximum deformation at the initial moment of closing and closing moment was obtained.

关键词(KeyWords): 止回阀;动网格;流固耦合;结构变形
check valve;dynamic mesh;fluid-solid coupling;structural deformation

Abstract:

Keywords:

基金项目(Foundation): 四川省应用基础研究项目(2016JY0098);; 四川省高校重点实验室开放基金项目(GK201609);; 四川理工学院研究生创新基金项目(y2017023)

作者(Author): 赵云;胡光忠;文华斌;邹亮;纪博凯;
Zhao Yun;Hu Guangzhong;Wen Huabin;Zou Liang;Ji Bokai;School of Mechanical Engineering, Sichuan University of Science & Engineering;

Email:

DOI:

参考文献(References):

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享