电动汽车空调涡旋压缩机油气分离性能的研究Research on Oil-gas Separation Regular of an Air Conditioning Scroll Compressor for Electric Automobile
刘兴旺,庞成武
LIU Xing-wang,PANG Cheng-wu
摘要(Abstract):
为探寻电动汽车空调涡旋压缩机中油气分离规律,利用FLUENT软件对不同进口方式和不同进口速度下的油气分离器进行了数值模拟,先用RNGκ-ε模型计算连续相的压缩气体,得到分离器内旋转流场的流线、压力及速度分布规律,再用DPM模型加入离散相的液态油滴进行计算,得到了油气分离效率。对比分析两相流场的模拟结果,得到入口方向和进口速度对分离效率的影响规律,为油气分离器的优化设计提供了理论依据。
To explore the regular of oil and gas separation of an air conditional compressor for electric automobile,in order to achieve the goal,at first,utilize fluid analysis software Fluent to carry out numerical simulation under the condition of di.erent inlet ways and inlet velocities,and then,RNG κ-ε model is used to calculate the compressed gas of continuous phrase,and the flow,pressure and velocity distributions of the rotating flow field in the separator were obtained,further,the DPM model is used to calculated the oil and gas separation efficiency when discrete phase liquid droplets is added. The simulation results of the twophase flow field are compared and the influence of inlet direction and inlet velocity on separation efficiency is obtained,Which provides a theoretical basis for the optimization design of oil and gas separators.
关键词(KeyWords):
电动汽车涡旋压缩机;油气分离;分离效率
electric scroll compressor;oil and gas separation;separation efficiency
基金项目(Foundation): 国家自然科学基金项目(51265026)
作者(Author):
刘兴旺,庞成武
LIU Xing-wang,PANG Cheng-wu
参考文献(References):
- [1]佟丽蕊,张振迎,王兴国.电动汽车空调系统研究进展[J].制冷,2015(1):61-67.
- [2]袁惠新,李双双,付双成,等.三相分离旋流器内流场及分离性能的研究[J].流体机械,2015,43(1):28-32.
- [3]查海滨,张晓慧,王君,等.涡旋压缩机非定常流动的三维数值模拟[J].流体机械,2016,44(2):17-23.
- [4]李超,杨紫娟,丁凯,等.涡旋压缩腔径向泄漏对内部流场影响的分析[J].流体机械,2016,44(1):14-18.
- [5]刘杨,王振波.水力旋流器分离效率影响因素的研究进展[J].流体机械,2016,44(2):39-42.
- [6]郝云.基于FIUENT对油气分离器结构进行优化[J].内蒙古石油化工,2015(16):55-56.
- [7]吴昊.基于FIUENT的两种油气分离器分离效率分析[J].计算机辅助工程,2016,25(2):55-56.
- [8]丁晟,钟崴,蒋建江,等.基于CFD的离心式油气分离器分离效率研究[J].压缩机技术,2010(4):4-8.
- [9]周华,夏南.油气分离器内气液两相流的数值模[J].计算力学报,2006,23(6):766-771.
- [10]冯健美,杨鑫,高翔,等.旋风式油气分离器数值模拟与实验研究[J].西安交通大学学报,2011,45(7):55-59.
- [11]李海峰,吴冀川,刘建波,等.有限元网格剖分与网格质量判定指标[J].中国机械工程,2012,23(3):368-377.
- [12]王明波,王瑞和.不同离散格式在湍流旋流流动数值模拟中的应用[J].中国机械工程,2007,18(5):600-603.
- [13]赵军平,谢雪梅.旋风分离器能力校核与经运行[J].设备管理与维修,2015(S2):296-298.