徐静,涂桥安,孙见君,陶丹萍,刘士国
XU Jing,TU Qiao-an,SUN Jian-jun,TAO Dan-ping,LIU Shi-guo (Nanjing Forestry University

• 1:南京林业大学

摘要(Abstract)：

表面粗糙度对机械密封性能有着显著影响。利用MMU-2摩擦磨损试验机和表面轮廓仪,对3个不同粗糙程度的密封端面进行了摩擦磨损试验。引入特征粗糙度,研究了3个不同粗糙程度的密封端面在摩擦磨损过程中的特征粗糙度变化规律,并与表面的轮廓算术平均偏差粗糙度变化规律进行了比较。研究表明,不同初始粗糙程度的端面在跑合过程结束后,粗糙度趋于一致。这一结果为利用特征粗糙度正确设计机械密封端面,合理选择端面加工方法提供了依据。
The performance of mechanical seals was influenced significantly by surface roughness.On the MMU-2 friction and wear test machine and the LI-3 type stylus profilometer,three stationary rings with different surface roughness were tested.The law of characteristic roughness change of seal faces with different primary surface roughness was studied during the running-in,and was compared with the law of profile arithmetic average deviation roughness change of surface.The research results show that the roughness of the surface changes from different to consistent.The results provide a basis for the exact designing seal-face roughness of mechanical seals and the reasonable selecting manufacturing method of seal faces by characteristic roughness.

关键词(KeyWords)： 机械密封;分形;轮廓算术平均偏差粗糙度;特征粗糙度
mechanical seal;fractal;profile arithmetic average deviation roughness;characteristic roughness

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 徐静,涂桥安,孙见君,陶丹萍,刘士国
XU Jing,TU Qiao-an,SUN Jian-jun,TAO Dan-ping,LIU Shi-guo (Nanjing Forestry University

参考文献(References)：

• [1]Mayer E.姚兆生,许仲枚,王俊德译.机械密封(第六版)[M].北京:化学工业出版社,1981.
• [2]Lebeck A O.端面密封波度的预计、测量、起因和影响[A].第十届国际流体密封会议论文集[C].四川密封技术研究所编译,重庆:科学技术文献出版社重庆分社,1987.196-210.
• [3]杨惠霞,顾永泉.考虑表面锥度、波度和粗糙度的两维机械密封混合摩擦研究[J].流体机械,1994,22(5):3-8.
• [4]Vizintin J.An Experimental Study on the Influence ofDifferent Surface Topographies on Mechanical SealPerformance[A].19th International Conference onFluid Sealing[C].Poitiers,France,2007:197-206.
• [5]孙见君,何小元,徐建中,等.机械密封端面形貌分形行为[J].石油化工设备,2007,(6):15-18.
• [6]魏龙,顾伯勤,冯飞,等.机械密封摩擦副端面形貌的分形特征[J].石油化工高等学校学报,2009,(2):59-62.
• [7]葛世荣,Tonder K.粗糙表面的分形特征与分形表达研究[J].摩擦学学报,1997,17(1):73-80.