赵文元;穆塔里夫·阿赫迈德;田雪峰;
ZHAO Wen-yuan;Mutellip Ahmat;TIAN Xue-feng;Xinjiang University;

• 1:新疆大学

摘要(Abstract)：

针对焊接金属波纹管在复杂工况下的失弹、疲劳失效的现象,以波纹管为研究对象,建立三维模型,应用静力学、热力学理论和有限元计算、试验分析相结合的方法对机械密封波纹的性能进行了分析,得到了不同力和温度作用下波纹管的受力分布、压缩量、刚度和热变形的变化规律及相互影响关系。结果表明:温度和力的作用对波纹管的失弹失效有较大影响。研究结果对于波纹管的优化设计、疲劳寿命分析、机械密封的选用和维护等提供了相关数据和理论依据。
In view of the elasticity loss and fatigue failure phenomena of welded metal bellows under complex operating conditions,in this paper,by using the bellows as the research object,a three-dimensional model was established,and the performance of the mechanical seal bellows was analyzed by the method of combination of the theory of static mechanics and the thermodynamics,finite element calculation and test analysis. The stress distribution,compression,stiffness and thermal deformation of bellows under the action of different force and temperature and relations of mutual influences were obtained. The results show that the effect of temperature and force has a greater influence on the elasticity loss and failure of the bellows. The research results provided relevant data and theoretical basis for the optimization design,fatigue life analysis and selection and maintenance,etc. of mechanical seals.

关键词(KeyWords)： 焊接金属波纹管;失弹;结构-热耦合;疲劳失效;多物理场
welded metal bellows;loss of elasticity;structural-thermal coupling;fatigue failure;multi-physical field

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51565056)

作者(Authors): 赵文元;穆塔里夫·阿赫迈德;田雪峰;
ZHAO Wen-yuan;Mutellip Ahmat;TIAN Xue-feng;Xinjiang University;

参考文献(References)：

• [1]韩立杰,尼加提·玉素甫,杨虎,等.S形焊接金属波纹管的轴向刚度分析[J].机械设计,2016(6):51-55.
• [2]杨虎.机械密封用S型焊接金属波纹管组的刚度试验与理论模拟分析[D].乌鲁木齐:新疆大学,2014.
• [3]魏龙,常新中,张鹏高.接触式机械密封端面泄漏模型的研究进展[J].流体机械,2012,40(2):36-40.
• [4]姜宏春,蔡纪宁,张秋翔,等.机械密封用挤压成型金属波纹管应力及轴向刚度的有限元分析[J].化工设备与管道,2007,44(5):13-17.
• [5]单晓亮,胡欲立.机械密封温度问题研究方法综述[J].流体机械,2006,34(8):37-40.
• [6]刘永刚,司东宏,马伟,等.流固耦合下含夹层阻尼的多层金属波纹管刚度和阻尼研究[J].机械工程学报,2014(5):74-81.
• [7]曲仁龙.波纹管挤压成型的有限元分析及形状优化[D].大连:大连理工大学,2016.
• [8]万宏强,汪亮,刘扬,等.基于ANSYS的U型波纹管参数计算与分析[J].西安工业大学学报,2008(2):123-128.