查海滨,姜营,王君,仇性启
ZHA Hai-bin,JIANG Ying,WANG Jun,QIU Xing-qi

• 1:中国石油大学(华东)

摘要(Abstract)：

提出一种涡旋压缩机气体流场对固体边界受力变形影响的单向流固耦合计算方法,建立了考虑泄漏间隙的带有齿头修正的渐变啮合间隙变壁厚的涡旋压缩机三维几何模型,采用LES湍流模型对其工作过程进行模拟从而得到流场分布,其压力分布沿Z方向不均匀,压差在涡旋型线展角492°处最大。将压力场载荷直接加载到固体边界上,得到任意工作状态下的涡旋齿受力和变形规律,分析了流场变化对固体边界涡旋齿受力、变形的影响。得到了涡旋齿的受力和变形规律,沿涡旋齿型线展角500°处变形最大与压力差分布相符。该压力载荷加载方式更加连续,更接近于实际工作状态,计算结果更为准确。
A one-way FSI simulation calculation method based on the flow field's effect on structure boundary deformation was proposed,which discuss the entire effect of the flow field generating to structure boundary forcing and deformation. A 3-D scroll compressor model with leakage was built based on tapered meshing clearance and thickness scroll wrap. The pressure field distribution was obtained through the working process simulation of the liquid-injected scroll compressor with a LES viscosity model,which showed the pressure along the Z axis was uneven and the maximum of pressure difference was found in the generating angle492°along the profile. The stress and deformation distribution laws were obtained on any work state through loading the pressure on the solid boundary directly. The stress and deformation laws were obtained along the wrap with the pressure difference,the results show that there are two obvious maximums in the middle of the wrap and the maximum deformation was found in the generating angle 500°along the profile. The loading process was more continuous,closer to the actual process,and the results were more accurate.

关键词(KeyWords)： 涡旋压缩机;流场模拟;流固耦合;应力;变形
scroll compressor;simulation;FSI;stress;deformation

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(50806082)

作者(Author): 查海滨,姜营,王君,仇性启
ZHA Hai-bin,JIANG Ying,WANG Jun,QIU Xing-qi

参考文献(References)：

• [1]刘振全,王君.涡旋式流体机械与涡旋压缩机(第一版)[M].北京:机械工业出版社,2007:30-45.
• [2]Winandy E,Lebrun J.Scroll Compressors Using Gas and Liquid Injection:Experimental Analysis and Modelling[J].International Journal of Refrigeration,2002,25(8):1143-1156.
• [3]Bell I,Groll E,Braun J,Horton T.Optimization of a Scroll Compressor for Liquid Flooding[J].International Journal of Refrigeration,2012,35(7):1901-1913.
• [4]Wernet M,Zante D,Strazisar T,et al,Prahst S.Characterization of the Tip Clearance Flow in an Axial Compressor Using 3-D Digital PIV[J].Experiments in Fluids,2005,39(4):743-753.
• [5]刘振全,戚智勇.涡旋压缩机动涡旋盘应力及变形的研究[J].流体机械,1995,23(10):23-26.
• [6]金丹,陈旭,赵树峰.涡盘在气体力和温度载荷作用下的应力及变形分析[J].压缩机技术,2004,(5):7-9,14.
• [7]朱杰,屈宗长,江波,等.涡旋压缩机涡旋盘的变形分析[J].压缩机技术,1998,(2):7-9.
• [8]侯秀娟.CO2跨临界循环压缩机的性能研究[D].唐山:河北联合大学,2012.
• [9]王君,张娜,刘凯,等.基于流场模拟的涡旋压缩机涡齿应力变形分析[J].工程热物理学报,2012,33(8):1334-1337.
• [10]袁寿其,徐宇平,张金凤,等.流固耦合作用对螺旋离心泵流场影响的数值分析[J].农业机械学报,2013,(1):38-42.
• [11]施卫东,徐燕,张启华,等.基于流固耦合的多级潜水泵叶轮结构强度分析[J].农业机械学报,2013,(5):70-73+100.
• [12]毛军,杨立国,郗艳红.大型轴流风机叶片的气动弹性数值分析研究[J].机械工程学报,2009(11):133-139.
• [13]江伟,郭涛,李国君,等.离心泵流场流固耦合数值模拟[J].农业机械学报,2012,(9):53-56+42.
• [14]裴吉,袁寿其,袁建平.流固耦合作用对离心泵内部流场影响的数值计算[J].农业机械学报,2009,(12):107-112.
• [15]王君,刘振全,涡旋压缩机渐开线类型线的双圆弧修正[J].机械工程学报,2005,41(9):202-206.
• [16]吴开波,李海生,陈英华,等.涡旋压缩机齿端面密封条的力载荷分布规律的研究[J].流体机械,2014,42(11):38-42.
• [17]李超,夏威,任燕玲,等.低压腔涡旋压缩机吸油管特性的数值研究[J].流体机械,2014,42(10):16-20.
• [18]王等旺,李捷,王昭,等.爆炸容器法兰变形试验研究与数值模拟[J].压力容器,2014,31(4):25-30.
• [19]唐学林,王秀叶,贾玉霞.基于流固耦合的灯泡贯流泵叶轮强度分析[J].排灌机械工程学报,2014,32(11):921-926.
• [20]王君,查海滨,张晓慧,等.一种渐变啮合间隙的的变壁厚涡旋齿型线研究[J].工程热物理学报.2013,34(8):1453-1456.