李超,夏威,任燕玲,张国军
LI Chao,XIA Wei,REN Yan-Lin,ZHANG Guo-jun

• 1:兰州理工大学

摘要(Abstract)：

为了研究吸油管对低压腔涡旋压缩机离心供油系统的影响,在不考虑润滑油可压缩性、相同油池高度和同一曲轴转速的条件下,采用标准κ-ε湍流模型,VOF两相流模型,分析了吸油管入口直径、结构形状对吸油管内油面高度的影响。结果表明,吸油管入口直径、结构形状存在一个最优值,取最优值时,吸油管中润滑油油面达到最大值,从而保证供油系统提供足够的供油量。
In order to study the oil suction pipe's impaction on low-pressure shell scroll compressor centrifugal oil supply system,without consideration of the compressibility of the lubricating oil,the same oil level and crankshaft speed,the standard k- εturbulence model and VOF two-phase flow model was employed in the simulation. The effect of the import diameter and structure shape of the oil suction pipe's to the oil head in the oil suction pipe was analyzed. The results show that there exist an optimal value of the oil suction pipe's import diameter and structure shape. At the optimal value,the head of the oil in the oil suction pipe's reach a maximum,thus guarantee the oil supply system will receive enough oil delivery.

关键词(KeyWords)： 涡旋压缩机;吸油管;数值模拟
scroll compressor;oil suction pipe;numerical simulation

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(50975132、51265026)

作者(Author): 李超,夏威,任燕玲,张国军
LI Chao,XIA Wei,REN Yan-Lin,ZHANG Guo-jun

参考文献(References)：

• [1]李超,余洋,赵嫚.涡旋压缩机的虚拟建模与运动仿真[J].流体机械,2012,40(1):26-30.
• [2]李超,谢文君,赵嫚.多场耦合作用下动涡旋盘的变形和应力研究[J].流体机械,2013,41(8):23-27.
• [3]Michael M CUI.Investigation on the Oil Supply System of A Scroll Compressor[C].International Compressor Engineering Conference at U.S.A Purdue University,2004:12-15.
• [4]Honghyun Cho,Byoung-Kil Yoo,Yongchan Kim,et al.CFD Simulation on the Oil Pumping System of A Variable Speed Scroll Compressor[C].International Compressor Engineering Conference at Purdue,2002:C24-1.
• [5]Kim H J,Lee E S,K wang S H.A study on the Oil Supply System of A Rotary Compressor[C].International Compressor Engineering Conference at U.S.A Purdue University,2000:25-28.
• [6]Zhanli Zhai.The Analysis of Oil Supply System for Twin-Cylinder Compressor[C].International Compressor Engineering Conference at U.S.A Purdue University,2008:1-7.
• [7]韩占忠,王敬,兰小平.FLUENT流体工程仿真计算实例与应用[M].北京:北京理工大学出版社,2004:14-16.