谭磊,曹树良
TAN Lei,CAO Shu-liang(Tsinghua University

• 1:清华大学

摘要(Abstract)：

基于流线迭代法和逐点积分法,用Fortran语言编程实现了供暖系统混水离心泵叶轮的水力设计,讨论了轴面流道形状、叶轮包角和滑移系数对设计计算结果的影响。基于Navier-Stokes方程,在贴体坐标系中,采用交错网格技术和SIMPLEC算法,对依据不同设计参数设计出的两个叶轮内部流场进行了数值模拟,并将计算得到的流场压力分布和轴面速度分布进行了对比,同时对两个叶轮进行性能预估。研究表明:轴面流道形状和叶轮包角影响叶轮内部压力场和速度场的均匀性,导致两个叶轮的水力效率值存在约2%的差别。
Based on streamline iteration method and point-by-point integration method,a computer code was developed in FORTRAN language to design the mixture water centrifugal pump in heating system in this paper.The analysis was used to analyze the effects of several parameters on the impeller shape,including the shape of the meridional passage,the impeller fold-angle and the slip factor.The pressure distributions and meridional velocity distributions of two impellers designed with different design variables were analyzed to predict their performance.The code used the SIMPLEC algorithm and body-fitted coordinate system to solve the Navier-Stokes equations.The results demonstrate that the shape of meridional passage and the impeller fold-angle affect the uniformity of pressure field and velocity field inside the impeller,which causes a difference of about 2% between the hydraulic efficiency of those two impellers.

关键词(KeyWords)： 离心泵;叶轮设计;数值模拟;水力效率
centrifugal pump;impeller design;numerical simulation;hydraulic efficiency

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(50776052);; 北京市科委2006年度科技计划重大资助项目(D0606005040411)

作者(Author): 谭磊,曹树良
TAN Lei,CAO Shu-liang(Tsinghua University

参考文献(References)：

• [1]江泽民.中国能源问题的思考[J].上海交通大学学报,2008,(3):345-359.
• [2]赵建波,王建军,蒋丽颖,等.混水直连供热系统的节能分析与应用[J].节能技术,2006,(2):190-193.
• [3]Van Doormaal J P,Raithby G D.Enhancements of theSIMPLEC method for predicting incompressible fluidflows[J].Numerical Heat Transfer,1984,(7):147-163.
• [4]Lakshminarayana B.An assessment of computationalfluid dynamics techniques in the analysis and designof turbo-machinery[J].ASME J Fluids Engineering,1991,113:315-352.
• [5]杨志伟,曹树良,王国玉,等.离心泵叶轮进口边位置的研究[J].水泵技术,2002,(6):8-11.
• [6]彭晓强,张永学,曹树良,等.低比转数离心泵叶轮出口紊流流动结构分析[J].农业机械学报,2004,(1):69-72.