涡旋式滤油机真空泵的涡盘壁厚变化研究Research on Wall Thick Variation of Scroll Plate for Scroll Vacuum Pump
张贤明,李萍,王立存,袁健,张渊博,杨旭,陈彬
ZHANG Xian-ming1,LI Ping1,WANG Li-cun1,2,YUAN Jian1,ZHANG Yuan-bo1,YANG Xu1
摘要(Abstract)：
对于基于泛函的通用涡旋型线的研究,选取不同的参数可分析出涡旋型线的不同性质。利用型线的曲率半径以及曲率半径的变化规律,分析出涡旋式滤油机真空泵的动涡盘内侧型线的变化规律,从而得出涡盘壁厚的变化规律。与基于泛函的通用涡旋型线选取不同系数、参数,建立涡盘内外型线的笛卡尔方程得出的涡盘型线图变化规律进行比较,结果表明:当k=2时,通用涡旋型线表示的涡旋盘为等壁厚;当k≥3时,通用涡旋型线表示的涡旋盘为变壁厚,与前期研究结论相吻合。
For research of general scroll profiles based on functional theory,different characters of scroll profiles can be analyzed by select different parameters.Using curvature radius of scroll profile and the variation of curvature radius,the variation of move scroll plate inner profile of scroll vacuum pump was analyzed,then wall thick variation of scroll plates was obtained.Compare with the variation of scroll plate profiles,whose cartesian coordinates were installed by general scroll profiles base on functional theory select a different type of line factor,parameter,and the conclusions showed that when k is equal to two,the scroll plates showed by general scroll profiles are wall thickness;and when k is equal to or greater than three,the scroll plates showed by general scroll profiles are variable wall thickness.So it is identical with preliminary study.
关键词(KeyWords)：
滤油机真空泵;通用涡旋型线;曲率半径;壁厚变化
vacuum pump;general scroll profiles;curvature radius;wall thick variation
基金项目(Foundation): 重庆市科技攻关资助项目(CSCT2011AC6086);; 重庆市教委科技资助项目(KJ110710);; 重庆市高校科技资助项目(KJTD201019/KJZH1211)
作者(Author):
张贤明,李萍,王立存,袁健,张渊博,杨旭,陈彬
ZHANG Xian-ming1,LI Ping1,WANG Li-cun1,2,YUAN Jian1,ZHANG Yuan-bo1,YANG Xu1
参考文献(References)：
- [1]李连生.涡旋压缩机[M].北京:机械工业出版社,1998.
- [2]巴德纯,许寿华,李树军,等.涡旋式无油真空泵抽气机理的研究[J].真空,1998,6(3):16-21.
- [3]杨广衍,滕普光,张鹏,等.涡旋真空泵的设计与操作[J].真空,2006,7(4):19-22.
- [4]张贤明,陈国强,王立存,等.基于泛函的通用涡旋型线几何理论研究[J].流体机械,2010,38(8):18-21.
- [5]雷闽,李文春,梁勇军.车用压缩天然气全复合材料气瓶缺陷分析[J].压力容器,2010,27(3):56-61.
- [6]樊映川.高等数学讲义[M].北京:高等教育出版社,1982.
- [7]王立存.通用涡旋型线集成设计理论与方法研究[D].重庆:重庆大学博士学位论文,2007.
- [8]李超,余洋,赵嫚,等.涡旋压缩机的虚拟建模与运动仿真[J].流体机械,2012,40(1):26-30.
- [9]王立存,陈进.涡旋压缩机通用涡旋型线控制方程的必要性研究[J].中国机械工程,2008,5(10):1233-1236.
- [10]屈宗长,樊灵,王迪生.通用型线涡旋压缩机的几何理论[J].西安交通大学学报,1999,33(11):39-42.
- [11]王立存,罗礼培,王旭东,等.基于泛函的通用涡旋式滤油机真空泵三维建模及动态仿真分析[J].流体机械,2011,39(6):25-28.