吴金星;栗俊芬;潘彦凯;伍焱兵;王志杰;
WU Jin-xing;LI Jun-fen;PAN Yan-kai;WU Yan-bing;WANG Zhi-jie;Research Center of Saving Energy Technology of Zhengzhou University;Zhengzhou Institute of Automation;

• 1:郑州大学节能技术研究中心
• 2:郑州自动化研究所

摘要(Abstract)：

针对地源热泵系统中U型埋管换热器建立三维模型,用FLUENT软件对比分析了四种U型埋管换热器的单井换热量,结果表明,单井中布置三组U型埋管为宜,并提出了出口管捆扎式三U型埋管,且捆扎后外敷绝热层更有利于提高三U型埋管的换热量,提高回填材料的导热系数就像U型埋管加装了翅片一样,也有利于提高换热量,但材料导热系数取值存在极限。
A three-dimensional model was established about U-ground-tube heat exchangers in ground- source heat pump system. The heat flow per well of four U-ground- tube heat exchangers was simulated by FLUENT. The results show that the arrangement of 3U-ground-tube in a well is very appropriate. A new kind of the heat exchanger with tying outlet tube of three-U-ground tube has been proposed,and the thermal insulating layer is added external of tying outlet tube. Improvement of the thermal conductivity of the backfill material can increase heat flow,but the thermal conductivity is limited.

关键词(KeyWords)： 地源热泵;换热器;三U型埋管;回填材料;数值分析
ground source heat pump;heat exchanger;three-U ground tube;backfill material;numeircal analysis

Abstract:

Keywords:

基金项目(Foundation): 郑州市科技创新团队建设项目(10CXTD158)

作者(Authors): 吴金星;栗俊芬;潘彦凯;伍焱兵;王志杰;
WU Jin-xing;LI Jun-fen;PAN Yan-kai;WU Yan-bing;WANG Zhi-jie;Research Center of Saving Energy Technology of Zhengzhou University;Zhengzhou Institute of Automation;

参考文献(References)：

• [1]范军,刁乃仁,方肇洪.竖直U型埋地换热器两支管间热量回流的分析[J].山东建筑工程学院学报,2004,19(1):1-4.
• [2]沈国民,张虹.竖直U型埋管地热换热器热短路现象的影响参数分析[J].太阳能学报,2007,28(6):604-607.
• [3]陈莹.地埋管地源热泵回填材料试验研究[D].北京:中国地质大学,2008.
• [4]吴金星,潘彦凯,李俊超.单U型埋管换热器热短路影响因素分析[J].低温建筑技术,2012,34(2):101-103.
• [5]薛玉伟,季民,李新国,等.单U、双U型埋管换热器换热性能与经济性研究[J].太阳能学报,2006,27(4):410-413.
• [6]齐洪洋,高磊,张莹莹,等.管壳式换热器强化传热技术概述[J].压力容器,2012,29(7):77-82.
• [7]孙海阳,钱才富.低压降高效换热器复合强化传热试验研究[J].压力容器,2012,29(11):17-23.
• [8]王凤超.滚轮装置在U形管式换热器中的应用[J].化工设备与管道,2014,51(2):30-33.
• [9]张铁钢,梁学峰,王朝平.新型高效扭曲管双壳程换热器研制[J].压力容器,2014,31(1):68-74
• [10]张晓霞,周俊生.倾角渐增波纹翅片管换热器空气侧流动与换热特性的数值模拟[J].流体机械,2013,41(8):83-86
• [11]朱祖文,蒋云云,何一坚.天津地区双U型地源热泵地埋管换热器性能模拟研究[J].流体机械,2013,41(6):58-64.
• [12]王福军.计算流体力学分析-CFD软件原理与应用[M].北京:清华大学出版社,2004.