张云,江志农,张进杰
ZHANG Yun,JIANG Zhi-nong,ZHANG Jin-jie

• 1:北京化工大学化工安全教育部工程研究中心

摘要(Abstract)：

目前压缩机气阀的设计大多数是按照已有设备进行经验设计,定量设计研究比较少。本文结合使用CFD软件模拟的方法对压缩机气阀弹簧刚度进行优化设计。文中首先对压缩机的吸气过程进行了三维的瞬态模拟,其中阀片运动规律由编写的UDF函数定义,最终得出气缸内部的流体状态以及气阀的运动规律,结果更加实际准确。在此基础上对一组弹簧刚度进行模拟,得出气阀运动规律与弹簧刚度的关系,在兼顾压缩机的寿命与效率的情况下,得出最优的弹簧刚度。这对于压缩机气阀的设计等具有指导性的意义。
Currently,the design of reciprocating compressor valve still lacks quantitative study. The paper focuses on the optimization design of valve spring stiffness with CFD method. A three-dimensional transient model of reciprocating compressor was exposed,and the motion of valve plate was governed by user-defined function( UDF),thus more accurate results of the flow field in the cylinder and the motion of the valve plate were obtained. Then,a group of spring stiffness was applied to the model in order to find out the optimal spring stiffness to arrive at the best compromise between the efficiency and the life of reciprocating compressor. And the research should have instructive significance for the future design of compressor valve.

关键词(KeyWords)： 压缩机;数值模拟;弹簧刚度;优化设计
reciprocating compressor;numerical simulation;spring stiffness;optimal design

Abstract:

Keywords:

基金项目(Foundation): 国家重点基础研究发展计划(“973”计划)项目(2012CB026000)

作者(Author): 张云,江志农,张进杰
ZHANG Yun,JIANG Zhi-nong,ZHANG Jin-jie

参考文献(References)：

• [1]杨现林,张晓东,沈珍平.天然气压缩机气阀的动态分析[J].江汉石油学院学报,2003,25(z1):124-125.
• [2]季玉茹,邢万坤,王德忠.利用MATLAB模拟气阀阀片的运动规律[J].压缩机技术,2010,(1):27-28.
• [3]陈国华,陈灵杰.解相关路径的裂纹扩展模拟及其应用[J].压力容器,2012,29(10):37-40.
• [4]张明辉,万全喜,吴家龙.基于Matlab与Solidworks方法的风力机叶片优化设计[J].流体机械,2012,40(11):41-45,65.
• [5]梁瑞,周涛,曹鑫.往复式压缩机音线振动数值分析[J].流体机械,2012,40(6):24-27.