李健,萧维智,葛鹰
Li Jian,Xiao Weizhi,Ge Ying

• 1:常州大学机械工程学院
• 2:常州贺斯特科技股份有限公司

摘要(Abstract)：

针对密集多热源电子设备发热量大散热困难的问题,设计了一种带翅片的液冷冷板。采用理论计算与ICEPAK热仿真结合的分析方法,研究了7种带有不同形状、不同排布方式的翅片的冷板,对冷板及冷板上热源的温度情况,冷板内流道中冷却液的流动情况进行分析,并通过试验的方法对仿真结果加以验证。研究表明:具有交错排列的菱形翅片冷板可以有效地防止冷板流道内形成流动边界层,破坏长距离流动形成"入口效应",与其他形式翅片冷板相比具有更好的散热性能;随着冷却液流量的增加,交错排列菱形翅片冷板的散热性能优势更突出。
In order to solve the problem of difficulty of heat dissipation due to generation of large amount of heat of the dense multi-heat source electronic equipment,a kind of liquid cooled cold plate with fins was designed.By combining theoretical calculation with ICEPAK thermal simulation,seven cold plates with fins of different shapes and arrangement were studied.The temperature of the heat source on the cold plate and the coolant flow in the channel were analyzed,and the simulation results were verified by experiment.The research shows that the rhombic fin cold plate with staggered arrangement can effectively prevent the formation of flow boundary layer in the flow channel and destroy the long-distance flow to form the "entrance effect".Compared with other forms of finned cold plate,it has better heat dissipation performance.With the increase of cooling fluid flow,the cooling performance of staggered rhombic fin cold plate is more prominent.

关键词(KeyWords)： 密集型多热源;液冷冷板;翅片;ICEPAK热仿真
dense multi-heat sources;liquid-cooled cold plate;fin;ICEPAK thermal simulation

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 李健,萧维智,葛鹰
Li Jian,Xiao Weizhi,Ge Ying

参考文献(References)：

• [1]宋芳芳,何小琦,恩云飞.电子元器件热设计及分析方法研究[C]// 中国电子学会第十七届电子元件学术年会,2014.
• [2]平丽浩,钱吉裕,徐德好.电子装备热控新技术综述(上)[J].电子机械工程,2008,24(1):1-9.
• [3]李兵强.微通道液冷冷板技术研究进展[J].科技视界,2013(7):60.
• [4]Jin L W,Lee P S,Kong X X,et al.Ultra-thin mini-channel LCP for EV battery thermal management[J].Applied Energy,2014,113:1786-1794.
• [5]Luo X,Mao Z.Thermal modeling and design for microchannel cold plate with high temperature uniformity subjected to multiple heat sources[J].International Communications in Heat and Mass Transfer,2012,39(6):781-785.
• [6]Lee Y J,Lee P S,Chou S K.Enhanced thermal transport in microchannel using oblique fins[J].Journal of Heat Transfer,2012,134(10):101901.
• [7]弗兰克 P.英克鲁佩勒.传热和传质基本原理[M].北京:化学工业出版社,2007.
• [8]徐森森,刘寅,袁冬颜.基于埋地换热器的强化传热研究现状及展望[J].流体机械,2019,47(6):68-75.