朱冬生,曾力丁,钱颂文
ZHU Dong-sheng,ZENG Li-ding,QIAN Song-wen(South China University of Technology

• 1:华南理工大学
• 2:华南理工大学
• 3:华南理工大学 广州五山510640
• 4:广州五山510640

摘要(Abstract)：

在综述管壳式换热器和板式换热器国内外污垢研究的基础上,介绍了轧槽管防垢性能实验和污垢模型,轧槽管的污垢热阻为光管的0.52~0.88倍,污垢条件下的传热Nu数为光管的1.8倍。轧槽管污垢热阻为流速的函数,当流速由0.25m/s增至0.75m/s时,污垢热阻减小至原来的66.7%。
Basing on the review of the investigations of fouling in shell-and-tube heat exchanger and plate heat exchanger,the experimental investigation of fouling prevention in corrugated tubes and the fouling models was introduced.Experimental investigation shows that the heat resistance of fouling in corrugated tube is 0.52～0.88 times that of smooth tube.The Nusellt number is 1.8 times that of smooth tube.The heat resistance of fouling in corrugated tube is majorant of fluid velocity.When the other parameter values are same,the fluid velocity increases from 0.25 m/s to 0.75 m/s,the heat resistance of fouling will reduce to 66.7%.

关键词(KeyWords)： 轧槽管;污垢;污垢热阻;换热器
corrugated tube;fouling;heat resistance of fouling;heat exchanger

Abstract:

Keywords:

基金项目(Foundation): 教育部新世纪优秀人才支持计划(NCET040826);; 清洁高效冷却装备的研制及产业化,广东省重大科技攻关项目(2005A30303001)

作者(Author): 朱冬生,曾力丁,钱颂文
ZHU Dong-sheng,ZENG Li-ding,QIAN Song-wen(South China University of Technology

参考文献(References)：

• [1]王家中.螺旋槽强化传热管污垢形成模型及其防垢性能实验研究[D].华南理工大学学位论文,1989.
• [2]Ravigururajan T S,Rabas T J.Overview of single-phase in-tube enhancements:Part 2-comparisons ofdata from different tube types and sources[A].A-merican Society of Mechanical Engineers(Paper)[C].1993.1-12.
• [3]Syed MZubair,Ramesh K Shah.Fouling of Plate-and-Frame Heat Exchangers and Cleaning Strategies[J].International Journal of Heat Exchangers,2004,5:129-156.
• [4]邓颂九,李启恩.传递过程原理[M].广州:华南理工大学出版社,1988.11.
• [5]Epstein N.Thinking about Heat Transfer Fouling:5×5 Matrix[J].Heat Transfer Engineering,1983,4(1):43-56.
• [6]XUZ M,GANY H,YANG S R.Experimental Inves-tigation on Fouling Performance of Corrugated Tubes[A].The Proceeding of ISTCC[C].2004,2:989-903.
• [7]朱冬生,肖建国,谭盈科.轧槽管抗污垢性能的试验研究[J].石油化工设备,1996,l25(1):8-11.
• [8]钱颂文,朱冬生,李庆领,等.管式换热器强化传热技术[M].北京:化学工业出版社,2003.
• [9]钱颂文.管壳式换热器设计原理[M].广州:华南理工大学出版社,1990.