樊永辉
Fan Yonghui;

• 1:华中理工大学

摘要(Abstract)：

本文首次提出了吸收式制冷系统降膜吸收器的二元设计方法,通过对溴化锂降膜吸收器进行计算,详细分析了吸收器内部溶液各参数的变化规律;并与传统设计方法进行了比较,说明二元设计方法有很大的优越性,可以用于吸收器的研究和工程设计。
This paper has first presented a binary design method for falling film absorbers in the absorption refrigeration systems. The variations of the major parameters of the solution inside a LiBr-H_2O absorber are carried out and analysed in detail. This method has also been used to design a LiBr-H_2O absorber and is compared with the conventional design method. The result show that the present method has some dvantagaes over the conventional one and is available for the study and engineering design of the absorbers.

关键词(KeyWords)：

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 樊永辉
Fan Yonghui;

参考文献(References)：

• [1] 茅以惠等,吸收式与蒸汽喷射式制冷机,机械工业出版议,1985．
• [2] 高田秋一,吸收式制冷机,耿惠彬等译,机械工业出版社,1987．
• [3] 樊永辉等,溴化锂吸收式制冷机吸收器的操作线方程、理论分析和实验研究,制冷学报,1989． 2,p49-57．
• [4] J. W. Andberg et al A Simplified Model for Absorption of Vapors into Liquid Films Flowing over Cooled Horizontal Tubes, ASHRAE Transactions, Vol. 93, Part2, p2454-60．
• [5] Zou Xin Xi et al, The Analysis of Heat and Mass Transfer of the LiBr-HzO Solution Film Absorption over the Horizontal Tubes, Proc. of the 17th International Congress of Refrigeration, Viena, 1987, 1026-1031．
• [6] J. W. Andberg et al, Design Guidelines for Water-Lithium Bromide Absorbers, ASHRAE Transactions, Vol. 89, Part 1, p220-32．
• [7] #12
• [8] 陈志远等,溴化锂吸收式制冷机中吸收过程的传热与传质分析,制冷学报,1983． 2,18-26
• [9] 复旦大学,国产溴化锂水溶液物性图表集,舰船辅助机电设备编辑组,1976．