涡流管制冷试验分析Research on Experiment of Vortex Tube
许敏宇,张景松,雷蕾,张亚坤,高云鹏
XU Min-yu,ZHANG Jing-song,LEI Lei,ZHANG Ya-kun,GAO Yun-peng(China University of Mining and Technology
摘要(Abstract)：
通过大量试验并结合参考文献资料进行了分析,认为涡流管温度分离模型为:压缩气体经喷嘴进入涡流室后分为三种流动情况,外旋流压缩,中间分界面,内旋流膨胀过程。内旋流膨胀是涡流管制冷的原因,而热管的热传递是涡流管主要的能量。
This paper discovers vortex tube temperature separation mode.A lot of experiments was conducted companied with theoretical research.The experiments results shows that the compression air goes into the vortex chamber through nozzle.Three different flow conditions was divided: external rotational flow compression,middle interface,inner rotational flow expansion.The paper indicated the inner rotational flow expansion is the reason of refrigeration of vortex tube,and the thermal conduction is the main energy of the vortex tube.
关键词(KeyWords)：
涡流管;温度分布;冷流率
vortex tube;temperature distribution;flow rate of cool air
基金项目(Foundation):
作者(Author):
许敏宇,张景松,雷蕾,张亚坤,高云鹏
XU Min-yu,ZHANG Jing-song,LEI Lei,ZHANG Ya-kun,GAO Yun-peng(China University of Mining and Technology
参考文献(References)：
- [1]周少伟,姜任秋,宋福元,等.涡流管内流动与传热数值模拟[J].化工学报,2006,57(7).1548-1552.
- [2]王如竹,丁国良,吴静怡,等.制冷原理与技术[M].科学出版社,2003.19-21.
- [3]王朋涛.涡流管内可压缩气体三维流场研究[D].哈尔滨:哈尔滨工程大学硕士,2006.48-57.
- [4]王志远,童明伟,原如冰.涡流管的流道特性及制冷能力实验[J].重庆大学学报,2009.32(8).971-974.
- [5]唐玉立,王亚芳,孙大坤,等.涡流管制冷的喷嘴效应[J].低温工程.1997(6).21-27.
- [6]曹勇,齐延锋,刘加永,等.涡流管热力学方法的研究[J].低温工程.2003(3).12-15.