入口管段增设整流栅对高炉鼓风机性能的优化Study on Performance Improvement About Intake of Blast Furnace Blower Pipe Additional Honeycomb Screen
梁高林,刘振全,杜彦蓉,冯勇
LIANG Gao-lin,LIU Zhen-quan,DU Yan-rong,FENG Yong
摘要(Abstract)：
介绍了一种通过在高炉风机的S型入口段,增加整流栅,对风机入口流场进行梳理的方法,并对增设整流珊后的风机运行参数进行了现场测量与计算,得出了整流栅的增设对风机的性能的优化起到了很大的积极作用。
It was introduced blast furnace blower on type S entrance section,by increasing the gate,to sort out the fan flow field at the entrance,and the fan operation parameters were added after the rectification and in-situ measurement and calculation,the additional gate performance improvement of fan played a very positive role.
关键词(KeyWords)：
高炉风机;S形状入口段;整流珊;性能特性
blast furnace blower;type of S entrance section;honeycomb screen;performance
基金项目(Foundation):
作者(Author):
梁高林,刘振全,杜彦蓉,冯勇
LIANG Gao-lin,LIU Zhen-quan,DU Yan-rong,FENG Yong
参考文献(References)：
- [1]张鸣远.高等工程流体力学[M].西安:西安交通大学出版社,2006:28-29.
- [2]王献孚,熊鳌魁.高等流体力学[M].武汉:华中科技大学出版社,2003:51-52.
- [3]赵振山,懂军,郭成鹏,等.基于数值涡流发生器双s型进气道被动流动控制装置参数优化[J].空气动力学报,2011,29(1):22-23.
- [4]郑小涛,程诗,冯磊,等.循环移动热载荷下压力管道弯头的安定性[J].压力容器,2013,30(4):67-70.
- [5]董帆,于跃平,朱晓农.径向进气室对离心压缩机气动特性影响的研究[J].流体机械,2012,40(11):15-20,40.
- [6]刘玉莹,李仁年,李琪飞,等.双流道转轮水力透平机的全流道数值模拟[J].流体机械,2012,40(1):22-25.
- [7]万斌.S弯扩压管主动流动控制研究[J].科学技术与工程,2009,9(7):18-19.
- [8]李俊超,余文龙.轴流压缩机原理与气动设计[M].北京:机械工业出版社,1985.