孙星星,孟祥铠,周国忠,虞淑瑶,赵文静
SUN Xing-xing,MENG Xiang-kai,ZHOU Guo-zhong,YU Shu-yao,ZHAO Wen-jing

• 1:浙江工业大学过程装备及其再制造教育部工程研究中心
• 2:浙江长城搅拌设备股份有限公司

摘要(Abstract)：

对侧入式单端面机械密封的温度场进行了研究。通过建立二维轴对称传热的有限元模型,用有限单元法求解了机械密封环的稳态温度场,在自主设计的试验台上进一步对静环温度进行测量,得到了不同工况下的静环温度实测值。结果表明:增大弹簧比压、介质压力和转速,密封端面温度显著升高。将计算结果与实测结果进行比较,其影响趋势基本一致,误差在可接受的范围内,说明文中所介绍的计算密封环温度的方法可行,为进一步研究此类典型结构密封环的热特性提供了参考。
The temperature field of side-entrysingle mechanical seal is studied in this paper.Through the establishment of two-dimensional finite element model of axisymmetric heat transfer,the steady-state temperature field of mechanical seal ring is solved by finite element method,the temperature of static ring was measured on self-designed bench further and obtained temperature values of static ring under different working conditions.The results showed thatseal face temperature was significantly rised with the spring pressure,medium pressure androtation speedincreasing.The simulation results are compared with the measured ones,impact trend is basically the same and error is within the acceptable range,the method of calculating temperature distribution of seal ring described in this paper is feasible,which provides a reference for further thermal characteristics studying of this typical kind of seal ring.

关键词(KeyWords)： 侧入式单端面机械密封;稳态温度场;试验研究
side-entry mechanical seals;steady temperature field;experimental research

Abstract:

Keywords:

基金项目(Foundation): 浙江省自然科学重点基金项目(LZ15E050002);; 浙江省自然科学基金项目(LQ16E050009)

作者(Author): 孙星星,孟祥铠,周国忠,虞淑瑶,赵文静
SUN Xing-xing,MENG Xiang-kai,ZHOU Guo-zhong,YU Shu-yao,ZHAO Wen-jing

参考文献(References)：

• [1]蔡晓君,徐旭康.侧开孔式搅拌器密封的设计[J].流体机械,2000,28(8):18-20.
• [2]李小莉.水平侧入式搅拌器机械密封损坏原因分析及改造[J].流体机械,2003,31(6):33-34+47.
• [3]程建辉,陈利海,葛培琪.机械端面密封计算技术[J].润滑与密封,2001(6):9-11.
• [4]王隽,王娟,周旭辉,等.船舶艉轴密封装置端面密封摩擦副温度场稳态分析[J].润滑与密封,2007,32(7):122-125.
• [5]楼建铭,孟祥铠,李纪云,等.波度端面机械密封温度场的有限元分析[J].流体机械,2015,43(9):15-21.
• [6]陈汇龙,彭正东,丁郁华,等.基于ANSYS的大型艉轴机械密封环温度场理论研究[J].润滑与密封,2010,35(10):73-76.
• [7]彭旭东,谢友柏,顾永泉.机械密封端面温度的确定[J].化工机械,1996(6):25-28.
• [8]宫晓清,孟祥铠,李纪云,等.核主泵用流体动压型机械密封温度场的数值研究[J].流体机械,2015,43(7):16-21.
• [9]周剑锋,顾伯勤.机械密封环的传热特性分析[J].机械工程学报,2006,42(9):201-206.
• [10]高斌超,孟祥铠,李纪云,等.机械密封热力耦合有限元模型与密封性能分析[J].摩擦学学报,2015,35(5):550-556.
• [11]Ruan B O,Salant R F,Green I.A mixed lubrication model of liquid gas mechanical face seals[J].Tribology Transactions,1997,40(4):647-657.
• [12]Djama?A,Brunetiere N,Tournerie B.Numerical modeling of the thermohdrodynamic mechanical face seal[J].Tribology Transactions,2010,53(3):414-425.