基于FLUENT技术迷宫密封的结构优化Structural Optimization Design of Labyrinth Seal Based on Software FLUENT
肖芳,王亚洲,刁安娜,刘常峰
XIAO Fang,WANG Ya-zhou,DIAO An-na,LIU Chang-feng
摘要(Abstract)：
以压缩机迷宫密封为研究对象,利用FLUENT模拟气体在迷宫密封中的内部流动,分析了气体在迷宫密封中的速度与压力分布,并研究了间隙宽度和空腔深度对迷宫密封泄漏量的影响,提出了4种不同尺寸的迷宫密封结构,分别得到在不同模型下泄漏量与压差之间的变化规律,其中模型D有效减少了迷宫密封的泄漏量,提高了密封性能。
Based on the labyrinth seal model of compressor using in flare gas recovery,FLUENT is used to imitate internal flow of labyrinth seal,the distributive figures of pressure,velocity are obtained,the relationship between leakage and gap width and cavity depth has been analyzed,four different size of labyrinth seal was chosen,variable curves of pressure difference and leakage is acquired,model D can effectively reduce the leakage of labyrinth seal,which improves the seal performance.
关键词(KeyWords)：
迷宫密封;结构优化;泄漏量;数值仿真
labyrinth seal;structural optimization;leakage;numerical simulation
基金项目(Foundation):
作者(Author):
肖芳,王亚洲,刁安娜,刘常峰
XIAO Fang,WANG Ya-zhou,DIAO An-na,LIU Chang-feng
参考文献(References)：
- [1]丁学俊,杨彦磊,肖国俊,等.迷宫密封流场与泄漏特性研究[J].流体机械,2006,34(4):20-24.
- [2]H M Martin.Labyrinth Packings[J].Engineering,1908,(1):35-36.
- [3]A Egli.The Leakage of Steam Through Labyrinth Seals[J].Transaction of ASME,1935,57:115-122.
- [4]W J Kearton,et al.Leakage of Air through Labyrinth Glands of Staggered Type[J].Proc I Mech E,1852,166:180-195.
- [5]Vermes G.A fluid mechanics approach to the labyrinth seal leakage type[J].ASME J Engn Power,1961,(4):161-169.
- [6]塔鲁达纳夫斯基K,著.李均卿,刁元康,译.非接触密封[M].北京:机械工业出版社,1986:97-99.
- [7]巴鹏,李旭,任希文,等.基于FLUENT技术的迷宫密封泄漏量分析[J].沈阳理工大学学报,2011,(2):8-11.
- [8]王福军.计算流体动力学分析[M].北京:清华大学出版社,2004.
- [9]David L Rhode,Richard G Adams.Rub-Groove Width and Depth Effects on Flow Predictions for Straight-Though Labyrinth Seal[J].Journal of Tribology,2004,126:781-787.
- [10]荣纪宁,张秋翔,张化福,等.端面刷式密封的制备及试验研究[J].流体机械,2012,40(4):9-12.
- [11]郭绍强.气分丙烷压缩机封油跑损原因分析及处理[J].流体机械,2012,40(4):61-63,75.
- [12]王和慧,卢均臣,关凯书,等.带接管组合法兰的强度和密封有限元分析[J].压力容器,2012,29(2):26-33.
- [13]Toshio H,Guo Zenglin,Gordon K R.Application of fluid dynamics analysis for rotating machinery-Part II:labyrinth seal analysis[J].Journal of Engineering for Gas Turbine and Power,2005,127:820-826.