史仕荧,梁楚楚,孟熙然,邢树宾,吴应湘,郑生宏
SHI Shi-ying,LIANG Chu-chu,MENG Xi-ran,XING Shu-bin,WU Ying-xiang,ZHENG Sheng-hong

• 1:中国科学院力学研究所
• 2:大庆油田有限责任公司第四采油厂
• 3:中国石油长庆油田分公司设备管理处

摘要(Abstract)：

轴流式井下旋流油水分离器是一种可用于油井中进行油水分离的新型分离器,在室内对影响其压降的因素(入口流量、分流比、含油率等)进行了试验研究。结果表明,与压降相关的无量纲参数Eu主要与Re_m、F和导流片结构有关。当导流片结构一定时,Re_m为主控参数。采用无量纲参数分析法还得到了压降的计算关系式,该关系式综合考虑操作参数、物性参数等对压降的影响,适用范围更广,为轴流式井下旋流油水分离器在井下应用时的压降预测提供了指导。
Axial downhole hydrocyclone separator is a new type of separator for oil-water separation in oil well. Experiment researches were carried out indoors on the factors that influence its pressure drop such as flow rate,split ratio,oil content and so on. The results show that the dimensionless parameter Eu related to the pressure drop is mainly correlated with Re_m,F and guide vane structure. When the guide vane structure is determined,Re_m is the main control parameter. Pressure drop calculation formula is also obtained by dimensionless parameter analysis method. This formula takes into account the effect of operating parameters and physical property parameters on pressure drop,thus has wider range of application,which provide guidance for prediction of pressure drop of the axial downhole hydrocyclone separator for application in downhole.

关键词(KeyWords)： 双同向旋流场;轴流式井下旋流油水分离器;井下油水分离;压降
co-dual vortex field;VTPS(vane type pipe separator);downhole oil-water separation;pressure drop

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 史仕荧,梁楚楚,孟熙然,邢树宾,吴应湘,郑生宏
SHI Shi-ying,LIANG Chu-chu,MENG Xi-ran,XING Shu-bin,WU Ying-xiang,ZHENG Sheng-hong

参考文献(References)：

• [1]Heravi P,Torabi F.A mathematical model for pressure drop of two-phase dry-plug flow in circular mini/micro channels[J].International Journal of Multiphase Flow,2016,87:9-15..
• [2]Garimella S,Agarwal A,Killion J.D.Condensation pressure drop in circular microchannels[J].Heat Transfer Eng,2005(26):28-35.
• [3]Abdulkamil Ajani,Mohan Kelkar,Cem Sarica,et al.Foam flow in vertical gas wells under liquid:Critical velocity and pressure drop prediction[J].International Journal of Multiphase Flow,2016(87):124-135.
• [4]周生田,张琪,李明忠,等.水平井筒变质量流体流动实验研究[J].石油大学学报(自然科学版),1998,22(5):53-55.
• [5]Zhiming Chen,Xinwei Liao,Xiaoliang Zhao,et al.Performance of multiple fractured horizontal wells with consideration of pressure drop within wellbore[J].Journal of Petroleum Science and Engineering,2016(146):677-396.
• [6]张劲松,冯叔初.对井下油水分离和同井回注的认识[J].油气田地面工程,2001,20(2):5-6.
• [7]徐晓峰,史仕荧.轴流式井下旋流油水分离器压降比性能研究[J].中国矿业,2015,24(8):144-147.
• [8]John A Veil,Stan B.DOWS reduce produced water disposal costs[J].Oil&Gas Journal.1999,97:76-85.
• [9]SHI Shi-ying,XU Jing-yu.Studies on flow field in a vane-type pipe separator for oil-water separation[J].Experimental Thermal and Fluid Science,2015(60):208-212.
• [10]李自立,冯淑初.除油旋流器压降比的数学模型[J].化工学报.2001,52(6):485-488.
• [11]Gomez C,Caldentey J,et al.Oil-water separation in liquid-liquid hydrocyclones(LLHC)-Experiment and Modeling[C].SPE 71538.Louisiana,30 September-3October,2001:1-18.
• [12]王尊策,郜冶,吕凤霞,等.液-液水力旋流器入口结构参数对压力特性的影响[J].流体机械,2003,31(2):16-19.
• [13]刘安生,蒋明虎,贺杰,等.压降比—液液旋流分离的一个重要性能参数[J].石油矿场机械,1997,26(1):27-29.
• [14]Thew M.Hydrocyclone redesign for liquid-liquid separation[J].The Chemical Engineer,1986(7,8):17-23.
• [15]刘晓敏,蒋明虎.脱油型静态水力旋流器压力损失测试研究[J].流体机械,2004,32(12):4-6.
• [16]刘海飞,邓晓辉,罗东红,等.柱型旋流器内单相流场压降的实验研究[J].水动力学研究与进展,2010,25(6):851-856.
• [17]易伟,余斌,刘秧,等.滚石冲击力计算方法研究[J].山地学报,2016(3):310-316.
• [18]Flores J G.Oil-water flow in vertical and deviated wells[D].Ph.D.Dissertation.The University of Tulsa,1997.
• [19]颜廷俊,李增亮,王旱祥,等.电潜泵井下油水分离系统方案设计[J].石油机械,2000(9):5-7.
• [20]王胜,刘敏,罗昌华,等.海上油田新型井下油水分离及回注工艺[J].石油科技论坛,2014(3):58-61.