姜民政,孙振旭,戴彧昕,王丽丽
JIANG Min-zheng,SUN Zhen-xu,DAI Yu-xin,WANG Li-li(NorthEast Petroleum University

• 1:东北石油大学

摘要(Abstract)：

应用CFX软件,建立了三维抽油泵仿真模型,利用动网格技术,对抽油泵进行了瞬态仿真分析,模拟计算了抽油泵整个冲程在不同工况时,泵阀水力损失、柱塞间隙容积损失和柱塞摩擦损失。计算结果表明冲次、井液含水率、泵径、泵间隙级别对抽油泵水力损失功率、容积损失效率和摩擦损失功率有不同的影响。
Applied CFX software,established three-dimensional simulation model of pump,using dynamic grid technology,carried out transient simulation analysis on the pump,simulated the valve hydraulic losses,plunger volume loss and plunger friction losses of the pump at different working conditions throughout the stroke.The results showed that the frequency,rate of water content,pump radius,and pump clearance-level have different effect on hydraulic losses,plunger volume losses and plunger friction losses of the pump.

关键词(KeyWords)： 抽油泵;水力损失;容积损失;摩擦损失;数值模拟
sucker pump;hydraulic losses;plunger volume loss;plunger friction losses;numerical simulation

Abstract:

Keywords:

基金项目(Foundation): 十二五国家科技支撑计划项目(2011BAA02B00-01)

作者(Author): 姜民政,孙振旭,戴彧昕,王丽丽
JIANG Min-zheng,SUN Zhen-xu,DAI Yu-xin,WANG Li-li(NorthEast Petroleum University

参考文献(References)：

• [1]张阳春.国内外石油钻采设备技术水平分析[M].北京:石油工业出版社,2002,125-147.
• [2]赵树洋.有杆抽油泵使用与研究现状以及发展展望[J].设计与制造,2003,(3):14-16.
• [3]Kilgore J J,Tripp H A.Walking Beam Pumping UnitSystem Efficiency[C].SPE:2788,1991.
• [4]Tripp HA,Kilgore J J.A Comparison Between Practi-cal and Measured Walking Beam Pump Parameters[C].SPE:20671,1990.
• [5]Kilore J J,Tripp HA.Walking Beam Unit System Effi-ciency Measurements[J].SPE:22788,2003-12.
• [6]汪建华.抽油泵柱塞和泵筒环隙漏失量计算的新公式[J].石油矿场机械,2009,38(3):58-61.