流体机械

2000, (04) 9-12+3

[打印本页] [关闭]
本期目录(Current Issue) | 过刊浏览(Past Issue) | 高级检索(Advanced Search)

离心叶轮内三维湍流流场的数值计算与实验比较
Computational and Experimental Investigation of 3-D Turbulent Flow Field in Centrifugal Im-peller

刘正先,曹淑珍,谷传纲,苗永淼,王玉明,刘艳梅
Liu Zhengxian et al(14)

摘要(Abstract):

采用高阶各向异性k -ε模型 (MAKE)和标准k -ε模型 (SKE)对实验离心叶轮内设计工况下的三维湍流流场进行了数值计算 ,并与采用LDV测量系统测得的实验结果进行了比较 ,结果表明 :两种模型均能模拟出设计工况下离心叶轮内气流的流动变化及二次流动现象 ,但由于SAKE模型考虑了旋转和曲率在流动过程中的影响 ,故在气流的分布趋势 ,流动方向的变化等方面 ,与实验值更接近
D turbulent flows in the shrounded centrifugal backsweptimp eller are numerically studided by using high order anisotropic k ε model(MAKE),standard k ε model(SKE),at the same times a comparison is made between computed solution and the previous experimental data using LDV measurement system.The result shows that the main flow velocity and secondary flow through the impeller in design working condition are well predicted by two models.Because MAKE model includes the effects of curvature and rotation,the computational results using MAKE model is closer to the experimental data than SKE model in some main flow field characteristics.

关键词(KeyWords): 离心叶轮;湍流;数值模拟
centrifugal impeller,turbulent flow,numerical simulation

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 刘正先,曹淑珍,谷传纲,苗永淼,王玉明,刘艳梅
Liu Zhengxian et al(14)

Email:

DOI:

扩展功能
本文信息
服务与反馈
本文关键词相关文章
本文作者相关文章
中国知网
分享