李晓鹏,李剑波,吴克启
LI Xiao-peng~(1,2),LI Jian-bo~1

• 1:华中科技大学
• 2:华中科技大学
• 3:华中科技大学 湖北武汉430074
• 4:兰州理工大学甘肃兰州730050

摘要(Abstract)：

以空调用轴流风扇系统为模型,利用三维雷诺时均Navier-Stokes方程和标准k-ε两方程湍流模型对其内部流场进行模拟计算,并在原使用风轮的基础上进行优化改进。性能试验和数值模拟结果表明,用CAD/CFD技术新设计的风轮达到了设计要求,提高了风量,降低了噪声。
Based on solving 3D Reynolds-averaged Navier-Stocks equations coupled with the standard k-ε equation,the inner flow of the model of axial flow fan in aircondition is simulated.Also,improvement was made on the impeller.In contrast with the results of the performance experiment,the new impeller designed with CAD/CFD technology can meet the requirements,flow rate being increased and noise being decreased.

关键词(KeyWords)： 空调轴流风机;CAD/CFD;内流与性能
air-condition axial flow fan;CAD/CFD;inner flow and performance

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 李晓鹏,李剑波,吴克启
LI Xiao-peng~(1,2),LI Jian-bo~1

参考文献(References)：

• [1]Wadia A R,Szucs P N,Crall D W.Inner Working ofAerodynamic Sweep[J].Journal of Turbomachinery,1998,120:671-682.
• [2]Hah C,Puterbaugh S L,Wadia A R.Control of ShockStructure and Second Flow Field Inide Transonic Com-pressor Rotors Through Aerodynamic Sweep[A].ASMEPaper 1998,119:561-562.
• [3]杨爱玲,陈康明.掠动叶对小型轴流风扇转子气动及声学特性的影响研究[J].流体机械,2002,30(1):18-20.
• [4]Inoue M,Kuroumaru M,Furukawa M,et al.Controlled-Endwall-Flow Blading for Multistage Axial CompressorRotor[A].ASME paper,1997,118:248-251.
• [5]Han Wanjin,Wang Zhongqi.Relationships between StaticPressure Distribution on Wall and Secondary Flow Lossesin Rectangular Turbine Stator Cascade with Leaned andCurvlinear Blade at Different Incidences[A].In:Interfluid1st International Congress on Fluid Handling System[C].Germany.1990.