曲海,李根生,刘营,盛茂,吴春方
QU Hai1,2,LI Gen-sheng2,LIU Ying2,SHENG Mao2

• 1:中国石化石油工程技术研究院
• 2:中国石油大学油气资源与探测国家重点实验室

摘要(Abstract)：

水力喷射压裂工艺是集水力射孔和压裂一体的新型油田增产技术。本文在室内试验基础上,运用计算流体力学方法,对水力喷射压裂过程中射流密封压力场开展研究。得到了井下水力射流在套管环空和孔道内部的压力及速度分布。揭示了喷嘴空间位置、喷嘴数量、射流压力和喷嘴直径对射流密封压力场影响规律。结果表明:高速射流之间具有很强的独立性,喷嘴空间位置和喷嘴数量不会影响射流密封压力;孔道压力随射流压力和喷嘴直径的增大而增加。研究结果对水力喷射压裂工艺现场施工提供科学依据。
Hydrajet-fractruing is a new stimulation technique in oilfield.It is very necessary to research jet parameters for the technique.Based on the experiments and computational fluid dynamics,the jet sealing pressure field in casing annular had been performed.The velocity and pressure distribution is obtained by fluid simulation.The following parameters were analyzed: nozzle space location,the number of jet,differential pressure and nozzle diameter.The result shows that the sealing pressure will be increased with the jetting pressure and nozzle diameter increasing.The sealing pressure field created by jetting has good independence.The space location and the number of nozzle have no influence to the sealing pressure.The conclusions can provide scientific basis for the oilfield performance of hydrajet-fracturing.

关键词(KeyWords)： 水力喷射压裂;室内试验;射流参数;密封压力;流场模拟
hydrajet-fracturing;experiment;jet parameters;sealing pressure;fluid simulation

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(50774089);; 国家科技重大专项项目(2009ZX05009-005-04A)

作者(Author): 曲海,李根生,刘营,盛茂,吴春方
QU Hai1,2,LI Gen-sheng2,LIU Ying2,SHENG Mao2

参考文献(References)：

• [1]Qu Hai,Li GenSheng,Huang ZhongWei,et al.Boos-ting mechanism[J].Petroleum Science and Technolo-gy,2010,28(13):1345-1350.
• [2]Surjaatmadja J B,Grundmann S R,McDaniel B W,etal.Hydrajet fracturing an effective method for placingmany fractures in openhole horizontal wells[R].SPE48856,1998.
• [3]McDaniel B W,Surjaatmadja J B,East L E,et al.Use of hydrajet perforating to improve fracturing suc-cess sees global expansion[R].SPE 114695,2008.
• [4]Jessica Houser,Orchard Petroleum,Inc.,RafaelHernandez,et al.Pinpoint Fracture Using a Multiple-Cutting Process[R].SPE,122949,2009.
• [5]Divesh C,Nuratas G,Colt A.Pinpoint-FracturingTechnology Improves Efficiencies While Solving Issueswith Conventional Hydraulic-Fracturing Processes.SPE 151559,2012.
• [6]李根生,曲海,黄中伟,等.水力喷射分段压裂技术在油气井压裂中的应用[C].王元基.水平井油田开发技术文集,中国南京,2010.5.9-5.12.北京:石油工业出版社,2010,518-522.
• [7]Li Gen-sheng,Huang Zhong-wei,Tian Shou-ceng,etal.Investigation and Application of Multistage Hydra-jet-fracturing in Oil And Gas Well Stimulation in China[R].SPE 131152,2010.
• [8]曲海,李根生,黄中伟,等.水力喷射压裂孔道内部增压机理研究[J].中国石油大学学报(自然科学版),2010,34(5):73-75.
• [9]高传昌,张晋华,刘新阳,等.脉冲液体射流泵压力特性的试验研究[J].流体机械,2011,39(9):1-5.
• [10]熊建华,李根生,黄中伟,等.高压水射流深穿透射孔试验研究[J].流体机械,2011,39(5):1-4.
• [11]刘丽,王煦,任呈强,等.油管与接箍接头的缝隙腐蚀评价[J].压力容器,2011,28(12):1-4,10.
• [12]曲海,李根生,樊永明,等.水力喷射压裂工艺在Φ101.6mm套管井中的应用[J].石油钻采工艺,2011,33(3):54-57.
• [13]曲海,李根生,黄中伟,等.水力喷射压裂孔内压力分布研究[J].西南石油大学学报(自然科学版),2010,33(4):85-88.
• [14]Jessica H,Rafael H.Pinpoint fracture using a multi-ple-cutting process[R].SPE 122949,2009.
• [15]陶文铨.数值传热学(第2版)[M].西安:西安交通大学出版社,2001.