低稠度叶片扩压器形状参数的分析Shape Parameter Analysis on Low Solidity Vaned Diffuser
费继友,戴冀,史敏,李连生
FEI Ji-you1,4,DAI Ji2,SHI Min3
摘要(Abstract)：
通过对一离心压缩机叶片扩压器内部流场进行三维粘性数值模拟,对比分析了小稠度扩压器的主要形状参数对气动性能的影响。结果表明对于小稠度扩压器设计可以找到稠度和叶型厚度的最佳值,使得压力恢复最大而损失水平较低,这对于工程设计具有指导价值。
On the basis of three dimensional viscous numerical simulation on the internal flow field in the vaned diffuser of a centrifugal compressor,the influence of shaper parameters on the pneumatic performance in low solidity vaned diffuser is compared.The results show that there are optimal values of the solidity and thickness for low solidity vaned diffuser,in which case,the pressure recovery is maximal and the loss is low.The results can play as a guide for design.
关键词(KeyWords)：
离心压缩机;叶片扩压器;稠度;数值模拟
centrifugal compressor;vaned diffuser;solidity;numerical simulation
基金项目(Foundation):
作者(Author):
费继友,戴冀,史敏,李连生
FEI Ji-you1,4,DAI Ji2,SHI Min3
参考文献(References)：
- [1]Amineni NK,Engeda A.Pressure recovery in LowSo-lidity Vaned Diffusers For Centrifugal Compressors[A].ASME Paper[C].1997-GT-472.
- [2]Hohlweg W C,Direnzi G L,Aungier R H.Comparisonof Conventional and Low Solidity Vaned Diffuers[A].ASME Paper[C].1993-GT-98.
- [3]Harada H,Goto M.Numerical and Experimental,Stud-ies of Single and Tandem Low-Solidity Cascade Diffus-ers in a Centrifugal Compressor[A].ASME Paper[C].1993-GT-108.
- [4]Pinarbasi A,Johnson M W.Experimental Flow FieldInvestigation in a Centrifugal Compressor Vaned Dif-fuser[A].ASME Paper[C].1995-GT-80.
- [5]Dallbert P,Gyarmathy G,Sebestyen G.Flow Phe-nomena in a Vaned Diffuser of A Centrifugal Stage[A].ASME.Paper[C].1993-GT-53.
- [6]Aungier R H.Centrifugal Compressors-A strategy forAerodynamic Design and Analysis[Z].2000,NewYork,ASME press.
- [7]赵晓路,王巍.离心压气机低稠度串列叶栅扩压器流场数值分析[J].工程热物理学报,1997,18(2):186-189.