弯掠叶片对高压轴流风机性能的影响Effect of swept and bowed blades on the performance of high-pressure axial flow fan
张静,秦国良
Zhang Jing,Qin Guoliang
摘要(Abstract):
为研究弯掠叶片在高压轴流风机中的应用,通过调整积叠线改变叶片各径向截面位置,形成多种不同弯掠形式的叶片。采用数值模拟方法进行风机内部流场分析,研究不同弯掠叶片对性能的影响。结果表明,后弯叶片对于全压有提升作用,同时可以提高大流量区效率,而前弯叶片会使风机全压下降;前掠叶片也可以使全压提升,对于原型轴流风机,选取前掠5°后弯5°的积叠线后可以使设计点全压上升5.3%,效率达到82.2%。研究结果对于风机叶片的积叠重构,提高气动性能具有一定的参考价值。
To investigate the application of swept and bowed blades in high-pressure axial flow fans,the position of each radial section of the blade was altered by adjusting the stacking line,forming blades with various sweep and bow configurations.Numerical simulation methods were employed to analyze the internal flow field of the fan and study the impact of different swept and bowed blades on performance.The results show that backward-bowed blades enhance the total pressure and can improve efficiency in the high-flow-rate region,while forward-bowed blades cause a decrease in the fan's total pressure.Forward-swept blades can also increase total pressure.For the prototype axial flow fan,selecting a stacking line with a 5° forward sweep and a 5° backward bow resulted in a 5.3% increase in total pressure at the design point,with an efficiency of 82.2%.The research findings provide a valuable reference for the stacking reconstruction of fan blades and the improvement of aerodynamic performance.
关键词(KeyWords):
轴流风机;弯掠叶片;数值模拟
axial flow fan;swept and bowed blades;numerical simulation
基金项目(Foundation): 国家自然科学基金项目(5217060402)
作者(Author):
张静,秦国良
Zhang Jing,Qin Guoliang
参考文献(References):
- [1]吴玉林,陈庆光,刘树红.通风机和压缩机[M].北京:清华大学出版社,2011.Wu Y L,Chen Q G,Liu S H. Fans and compressors[M].Beijing:Tsinghua University Press,2011.
- [2]吴乐天,邱绵靖,刘志伟,等.基于变环量方法的农用轴流风机设计及性能优化[J].农业工程学报,2024,40(20):210-218.Wu L T,Qiu M J,Liu Z W,et al. Expansion of the operation range of agricultural axial flow fans based on the variable circulation method[J].Transactions of the Chinese Society of Agricultural Engineering,2024,40(20):210-218.
- [3]姜晨龙,朱兴业.轴流风机结构优化设计及内部流动特性分析[J].排灌机械工程学报,2022,40(7):707-713.Jiang C L,Zhu X Y.Structural optimization design and internal flow characteristics analysis of axial flow fan[J]. Journal of Drainage and Irrigation Machinery Engineering,2022,40(7):707-713.
- [4]范亚明,宋超,郑闽锋,等.扩压器扩压角度对轴流风机噪音的影响[J].机电工程,2023,40(2):239-244.Fan Y M,Song C,Zheng M F,et al. Influence of diffuser on noise of axial-flow fan[J]. Journal of Mechanical&Electrical Engineering,2023,40(2):239-244.
- [5]孙未川,李科军,邓旻涯,等.高海拔地区轴流风机气动性能仿真及试验研究[J].机电工程,2025,42(1):185-194.Sun W C,Li K J,Deng M Y,et al. Aerodynamic performance simulation and experimental of axial fan at high altitude area[J]. Journal of Mechanical&Electrical Engineering,2025,42(1):185-194.
- [6]刘栋,张天泽,杨嵩,等.叶片尾缘形状对离心风机气动噪声的影响[J].排灌机械工程学报,2025,43(9):898-904.Liu D,Zhang T Z,Yang S,et al. Influence of blade trailing edge geometries on aerodynamic noise characteristics of centrifugal fan[J]. Journal of Drainage and Irrigation Machinery Engineering,2025,43(9):898-904.
- [7]李景银,张义云,祁大同.小型高压小流量轴流风机设计理论[J].流体机械,1997,25(11):21-24.Li J Y,Zhang Y Y,Qi D T. Design theory of small-scale high-pressure low-flow axial flow fans[J].Fluid Machinery,1997,25(11):21-24.
- [8]张才华,顾超华,郑水英.减小进口气流角对高压轴流风机性能的影响[J].轻工机械,2014,32(4):31-35.Zhang C H,Gu C H,Zheng S Y.Effects of decreasing inlet flow angle on performances of high-pressure axial-flow fans[J].Light Industry Machinery,2014,32(4):31-35.
- [9]胡盈彬,林健辉,马列,等.叶片数对轴流风机气动性能影响的数值研究[J].风机技术,2023,65(6):1-5.Hu Y B,Lin J H,Ma L,et al.Numerical study of the effect of blade number on the aerodynamic performance of axial fans[J]. Chinese Journal of Turbomachinery,2023,65(6):1-5.
- [10] Zhang L,Jin Z Y. Effect of blade numbers on aerodynamic performance and noise of small axial flow fan[J]. Advanced Materials Research,2011,199/200:796-800.
- [11] Obaidi A R A,Alhamid J,Khalaf H. Unsteady behaviour and plane blade angle configurations'effects on pressure fluctuations and internal flow analys is in axial flow pumps[J]. Alexandria Engineering Journal,2024,99:83-107.
- [12] Shi L J,Zhu J,Yuan Y,et al. Numerical simulation and experiment of the effects of blade angle deviation on the hydraulic characteristics and pressure pulsation of an axial-flow pump[J].Shock and Vibration,2021,2021(1):6673002.
- [13]凌杰达,王军,丁炎炎,等.基于遗传算法的轴流风机后导叶匹配性优化[J].风机技术,2021,63(5):33-37.Ling J D,Wang J,Ding Y Y,et al.Optimization of rear guide vane of axial flow fan based on genetic algorithm[J].Chinese Journal of Turbomachinery,2021,63(5):33-37.
- [14] Nath D D,Viswanath K,Patel A B. Experimental study of the effect of serrations on axial flow fan blad etrailing edge[C]//International Mechanical Engineering Congress and Exposition. Phoenix,Arizona,USA:ASME,2017.
- [15]郑楠,叶学民,胡佳密,等.锯齿襟翼尾缘叶片对轴流风机气动噪声的影响[J].热能动力工程,2022,37(9):50-58.Zheng N,Ye X M,Hu J M,et al.Effect of toothed flap trailing edge blades on the aerodynamic noise of an axial fan[J]. Journal of Engineering for Thermal Energy and Power,2022,37(9):50-58.
- [16]栾亨宣,陈庆光,翁丽媛,等.轴向间隙对旋风机气动特性及总性能的影响[J].流体机械,2016,44(8):16-21.Luan H X,Chen Q G,Weng L Y,et al.Influence of axial spacing on a counter rotating fan aerodynamic characteristics and performance[J].Fluid Machinery,2016,44(8):16-21.
- [17]卢家玲,楚武利,吴艳辉.轴流风扇轴向间隙及尾迹恢复效应[J].计算机仿真,2010,27(3):330-334.Lu J L,Chu W L,Wu Y H. Study on wake recovery effect an axial space of axial fan[J]. Computer Simulation,2010,27(3):330-334.
- [18]胡盈彬,刘小民,覃万翔,等.仿生尾缘襟翼设计及其对轴流风机气动性能的影响研究[J].中国电机工程学报,2023,43(增刊1):143-152.Hu Y B,Liu X M,Qin W X,et al.Bionic design of blade trailing edge flap and its influence on the aerodynamic performance of an axial fans[J]. Proceedings of the CSEE,2023,43(S1):143-152.
- [19]杨天康,叶学民,林卿,等.叶顶开槽——小翼结构对提升轴流风机性能影响的数值研究[J].热能动力工程,2023,38(7):36-43.Yang T K,Ye X M,Lin Q,et al.Numerical study on influence of blade tip slot-winglet pattern on performance improvement of an axial fan[J]. Journal of Engineering for Thermal Energy and Power,2023,38(7):36-43.
- [20]欧阳华.新型可逆式弯掠组合叶片的研究[D].上海:上海交通大学,2003.Ouyang H.Study ona new type reversible axial flow fan with skewed and combined blades[D]. Shanghai:Shanghai Jiaotong University,2003.
- [21]陈矛章.风扇/压气机技术发展和对今后工作的建议[J].航空动力学报,2002,17(1):1-15.Chen M Z. Development of fan/compressor techniques and suggestions on further researches[J]. Journal of Aerospace Power,2002,17(1):1-15.
- [22]黄愉太.空调用前掠式轴流风叶优化[J].流体机械,2023,51(9):93-98.Huang Y T. Optimization of forward-swept axial-flow fan blades for air conditioning[J]. Fluid Machinery,2023,51(9):93-98.
- [23]张森,田思宇,张新民,等.叶轮机械叶片弯掠气动技术研究进展[J].推进技术,2021,42(11):2417-2431.Zhang S,Tian S Y,Zhang X M,et al. Research progress of skew and sweep aerodynamic technology for turbomachinery blades[J]. Journal of Propulsion Technology,2021,42(11):2417-2431.
- [24]李杨,欧阳华,杜朝辉.轴流风扇转子叶片优化设计[J].上海交通大学学报,2007,41(9):1522-1525.Li Y,Ouyang H,Du Z H.The optimization design of axial flow fan rotor blade[J]. Journal of Shanghai Jiaotong University,2007,41(9):1522-1525.
- [25]金光远,欧阳华,杜朝辉.周向弯曲叶片内部三维流动扩稳机理的实验研究[J].实验流体力学,2013,27(3):23-30.Jin G Y,Ouyang H,Du Z H. Experimental investigation of extending stall-free mechanism of three-dimensional flow in circumferential skewed axial fans[J]. Journal of Experiments in Fluid Mechanics,2013,27(3):23-30.
- [26]胡俊,金光远,崔政伟,等.基于复合弯掠技术的轴流风机叶轮优化[J].气动力学学报,2019,37(6):966-973.Hu J,Jin G Y,Cui Z W,et al.Composite optimization of lean and sweep for axial fan impeller[J]. Acta Aerodynamica Sinica,2019,37(6):966-973.
- [27] Vad J,Halász G,Benedek T. Efficiency gain of low-speed axial flow rotors due to forward sweep[J].Proceedings of the Institution of Mechanical Engineers,Part A:Journal of Power and Energy,2015,229(1):16-23.
- [28]李松,蔡翔,朱路飞,等.基于单流道和结构网格的湿式潜水泵数值模拟[J].华东理工大学学报(自然科学版),2016,42(4):580-586.Li S,Cai X,Zhou S P,et al.Numerical Simulation of Wet Submersible Pump Based on the Single Passage and Structured Grid[J]. Journal of East China University of Science and Technology (Natural Science Edition),2016,42(4):580-586.