立式往复泵动力箱体优化与减振的研究Research on Optimization and Vibration Reduction for Box of Vertical Reciprocating Pump
陈正文,缪小冬,鲁飞,滕汉东,刘海山,文宏刚
CHEN Zheng-wen,MIAO Xiao-Dong,LU Fei,TENG Han-dong,LIU Hai-shan,WEN Hong-gang
摘要(Abstract)：
立式往复泵的结构强度与振动问题是工程领域的难题。本文以新型的立式三缸双作用往复泵动力箱为研究对象,基于有限元力学分析方法建立了数学模型,首先分析其在实际工况下的受力情况,对其强度与振动模态进行了数值计算与分析;再对其结构进行改进、计算与分析;最后通过试验测试证明了分析方法和结构改进的有效性。
The structural strength and vibration of the reciprocating pump has been a difficult problem in the field of engineering for a long time.In this paper,a new type of vertical three cylinder double acting reciprocating pump power box is studied.The mathematical model is established based on the finite element analysis method.Firstly,the strength and vibration modes are calculated and analyzed under the condition of the actual working conditions;then the structure is improved,the calculation and analysis;finally,through the experimental test,prove the validity of the analytic method and Structure improvement.
关键词(KeyWords)：
往复泵;动力箱体;振动控制
reciprocating pump;power box;vibration control
基金项目(Foundation): 安徽省科技重大专项计划项目(15czz02028)
作者(Author):
陈正文,缪小冬,鲁飞,滕汉东,刘海山,文宏刚
CHEN Zheng-wen,MIAO Xiao-Dong,LU Fei,TENG Han-dong,LIU Hai-shan,WEN Hong-gang
参考文献(References)：
- [1]《往复泵设计》编写组.往复泵设计[M].北京:机械工业出版社,1987.
- [2]Zhu Xiang,Gu Hai-ming,Jin Yong-xi.Constructional design of a vertical reciprocating vacuum pump[J].Vacuum,2008,45(2):23-25.
- [3]蒋发光,梁政,钟功祥,等.多缸单作用往复泵动力端动力学研究[J].石油机械,2007,35(3):19-22.
- [4]李春明.三缸单作用往复泵主机构的动力学仿真[J].机床与液压,2010,38(15):73-76.
- [5]袁东红,华锁宝,顾则红,等.往复泵振动和噪声机理分析及减振降噪措施[J].中国舰船研究,2009,4(5):75-80.
- [6]童章谦,徐兵.轴向柱塞泵的模态分析及基于壳体的结构优化[J].机床与液压,2010,38(15):65-67.
- [7]李兵,何正嘉,陈雪峰.ANSYS Workbench设计、仿真与优化[M].北京:清华大学出版社,2008.
- [8]李立碑,孙玉福.金属材料物理性能手册[M].北京:机械工业出版社,2011.
- [9]上海发电设备成套设计研究院.ASME核电规范与标准.14,QME-1:核电厂能动机械设备鉴定,2002版(S).上海:上海科学技术文献出版社,2007.