马士虎,章茂森,王黎明,江海龙,靳淑军,李忠,明友
MA Shihu,ZHANG Maosen,WANG Liming,JIANG Hailong,JIN Shujun,LI Zhong,MING You

• 1:武汉第二船舶设计研究所
• 2:合肥通用机械研究院有限公司
• 3:安徽省知识产权事业发展中心
• 4:合肥通用环境控制技术有限责任公司

摘要(Abstract)：

因燃机用调压阀的使用性能有特定要求，因此需要研制一种特定性能测试试验系统。详细介绍了燃气轮机用自力式压力调节阀性能试验系统设计方案，并对精确模拟燃机切换工况和管路阻力所采取的技术方案进行了探讨。在0～2.6 m~3/h的流量范围内对管路阻力变化、切换时间2个参数通过实际测试进行了验证。结果表明，该系统具有切换时间可调及管路阻力可调的特点，管路阻力损失模拟一致性较好，调压阀在17～29 s的时间范围内都可以实现系统对其要求的调节性能。该系统对类似功能产品的性能验证系统具有一定的参考和借鉴价值。
Because the performance of gas turbine regulating valve has special requirements，it is necessary to develop a special performance test system.The design scheme of the performance test system of self-operated pressure regulating valve for gas turbine was introduced in details，and the technical scheme adopted to accurately simulate the gas turbine switching condition and pipeline resistance was discussed.In the flow range of 0～2.6 m~3/h，two parameters of pipeline resistance change and switching time were verified by actual tests.The results show that the system has the characteristics of adjustable switching time and pipeline resistance，and the simulation consistency of pipeline resistance loss is good，and the valve can achieve the regulating performance required by the system within the time range of 17～29 seconds.This system has certain reference value to the performance verification system of similar function products.

关键词(KeyWords)： 自力式压力调节阀;性能试验;切换时间;阻力损失
self-operated pressure regulator;performance testing;switching time;resistance loss

Abstract:

Keywords:

基金项目(Foundation): 国家重点研发计划资助项目(2018YFB2004002)

作者(Author): 马士虎,章茂森,王黎明,江海龙,靳淑军,李忠,明友
MA Shihu,ZHANG Maosen,WANG Liming,JIANG Hailong,JIN Shujun,LI Zhong,MING You

参考文献(References)：

• [1]章茂森，黄明亚，靳淑军，等.核级仪表阀高温高压寿命试验装置的研制[J].流体机械，2016，44(2)：48-51.ZHANG M S，HUANG M Y，JIN S J，et al.Development of high temperature and pressure test equipment fornuclear grade needle valve service life[J].Fluid Machinery 2016，44(2)：48-51.
• [2]靳淑军，章茂森，程红晖，等.新型燃油压力调节阀设计与试验[J].流体机械，2013，41(10)：10-13.JIN S J，ZHANG M S，CHENG H H，et al.Design and test of a new type fuel pressure regulator valve[J].Fluid Machinery 2013，41(10)：10-13.
• [3]李想，张雪.汽轮机调节汽阀阀碟优化设计[J].化工设备与管道，2020，57(4)：56-58.LI X，ZHANG X.Optimum design of disk in steam regulating valve used for turbine[J].Process Equipment & Piping，2020，57(4)：56-58.
• [4]王剑，黄明亚，黄健，等.阀门寿命试验台研制[J].流体机械，2012，40(4)：45-48.WANG J，HUANG M Y，HUANG J，et al.Development of testing platform for valve service life[J].Fluid Machinery，2012，40(4)：45-48.
• [5]黄健，王剑，章茂森，等.阀门流量流阻测试装置数据监控系统研制[J].流体机械，2010，38(7)：27-31.HUANG J，WANG J，ZHANG M S，et al.Development of data monitoring system for valve flow and flow resistance testing device[J].Fluid Machinery，2010，38(7)：27-31.
• [6]章茂森，彭林，王剑，等.自力式燃油压力调节阀[J].阀门，2009(6)：15-26.ZHANG M S，PENG L，WANG J，et al.Research on the self-action pressure control valve[J].Valve，2009(6)：15-26.