多股流换热器的通道分配设计方法Passage Arrangement and Parameter Match in Multi-stream Heat Exchanger
李淑英,王忠建,张杨
LI Shu-ying1,WANG Zhong-jian1,ZHANG Yang2(1.Kaifeng Air Separation Group Co.
摘要(Abstract)：
通过分析板翅式换热器的传热与流动的原理,推导并获得了多股流板翅式换热器的换热及压降的计算公式。介绍了多股流换热器的传热计算数学模型,并在程序中实现了换热器的设计计算。在分析比较前人研究成果的基础上,提出了通道分配与排布的原则和相应的设计计算方法。提供了换热器横向导热控制的新思路,利用通道排布的周期性改善隔板温度的分布,再采用手段控制隔板温度的波动幅值,在一定程度下可以趋近等壁温的效果,可以有效减少横向导热。设计了用于实验的换热器试件并验证了设计的合理性。
By analyzing the principle of heat transfer and flow in plate-fin heat exchanger,the calculation formulas of heat transfer and pressure drop are derived.This paper introduces a mathematical model of heat transfer computing in multi-stream heat exchanger,and achieves the design calculation through program.Based on the analysis and comparison of results of previous researches,a principle of passage arrangement and the corresponding calculation method is proposed.A new idea to control the transverse conduction is provided.The periodic passage arrangement improves the temperature profile of separating plates.By taking means to control the amplitude of temperature fluctuation of separating plate,to a certain extent,the temperature profile of separating plates can be close to the constant surface temperature condition and can reduce the transverse heat conduction effectively.A heat exchanger is designed for the experiment,and proved to be rational through professional software.
关键词(KeyWords)：
板翅式换热器;多股流;通道分配
plate-fin heat exchanger;multi-stream;passage arrangement
基金项目(Foundation):
作者(Author):
李淑英,王忠建,张杨
LI Shu-ying1,WANG Zhong-jian1,ZHANG Yang2(1.Kaifeng Air Separation Group Co.
参考文献(References)：
- [1]王松汉.板翅式换热器[M].北京:化学工业出版社,1984.
- [2]嵇训达.我国板翅式换热器技术进展[J].低温与特气,1998,(1):22-27.
- [3]凌祥,周帼彦,邹群彩,等.板翅式换热器新技术及应用[J].石油化工设备,2002,31(2):1-4.
- [4]Suessmann W,Mansour A.Passage Arrangement in Plate-fin Heat Exchangers[C].Proceedings of XV In-ternational Congress of Refrigeration,1979,(1):421-429.
- [5]秦叔经,叶文邦.化工设备设计全书:换热器[M].北京:化学工业出版社,2003.
- [6]吴恩.紧凑式换热器的综合性能设计与优选[D].南京:南京工业大学,2006.
- [7]Prasad B S V.Fin efficiency and the mechanisms ofheat exchange in multi-stream plate-fin heat exchang-ers:formulation[J].International Journal of Heat andMass Transfer,1996,39(2):419-428.
- [8]Chato J C,Laverman R J,Shah J M.Analysis of par-allel flow multi-stream heat exchangers[J].Int.J.Heat Mass Transfer,1971,(14):1691-1705.
- [9]吴业正.制冷与低温技术原理[M].北京:高等教育出版社,2006.
- [10]陈长青,沈裕浩.低温换热器[M].北京:机械工业出版社,1993.
- [11]崔国民,周霄,赵永芹.基于最小熵产的多股流换热器通道排列分析及设计[J].化工进展,2010,29:642-645.
- [12]周珊虹.多股流氩换热器通道排列设计探讨[J].深冷技术,1994,(5):25-28.
- [13]杨世铭,陶文铨.传热学[M].北京:高等教育出版社,2009.
- [14]张哲,厉彦忠,田津津.多股流板翅式换热器的优化设计[J].石油化工,2002,31(11):928-931.
- [15]Haseler L E.Performance calculation methods formulti-stream plate-fin heat exchangers[C].in HeatExchangers,Theory and Practice,Hemisphere,Washington,D.C.,1983,:495-506
- [16]Prasad B S V.The performance prediction of multi-stream plate-fin heat exchangers based on stackingpattern[J].Heat Transfer Engineering,1991,12(4):58-70.
- [17]过增元,魏澍,程新广.换热器强化的场协同原则[J].科学通报,2003,48(22):2324-2327.
- [18]Zengyuan Guo,Senquan Zhou,Zhixin Li,LingenChen.Theoretical analysis and experimental confir-mation of the uniformity of temperature differencefield in heat exchanger[J].International Journal ofHeat and Mass Transfer,2002,(45),2119-2127.
- [19]王江,厉彦忠,张哲等.封头结构对板翅式换热器温度分布特性的影响[J].化工学报,2005,56(8):1413-1418.
- [20]王江,厉彦忠,周爱民,等.二次封头结构板翅式换热器出口温度分布的实验研究[J].西安交通大学学报,2005,39(7):706-709.