马利军,李双喜,马也,张秋翔,蔡纪宁
MA Li-jun,LI Shuang-xi,MA Ye,ZHANG Qiu-xiang,CAI Ji-ning

• 1:北京化工大学

摘要(Abstract)：

气膜浮环密封结构尺寸小,工作性能稳定,在高温高速等气体密封领域广泛应用。使用FLUENT软件,建立数值分析模型,计算了不同条件下气膜浮环密封的上浮力、泄漏量和实际偏心率等特性参数,通过实测结果验证了数值模型的正确性。研究结果表明:较大偏心率和节流长度能增加浮环的上浮力,过大和过小的操作压力和径向间隙不利于浮环上浮。研究结果为浮环密封结构的优化设计和操作参数的设定提供了一定的参考。
Because of small size structure and stable working performance,gas film floating ring seal(GFRS) has been widely used in high-temperature and high-speed gas sealing field. Numerical analysis model was established and characteristic parameters such as buoyant force,leakage rate and actual eccentricity,etc. of the gas film floating ring seal were calculated under different working conditions. And the correctness of the numerical model was verified by the measured results. The results show that the increased eccentricity and throttle length can enhance the buoyant force of the floating ring, but too big or too small operating pressure and radial clearance are not conducive to floating of the floating ring.The research results provide certain reference for optimal design and setting of operating parameters of the floating ring seal structure.

关键词(KeyWords)： 浮环密封;气膜;密封特性参数
floating ring seal;gas film;characteristic parameters of seal

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 马利军,李双喜,马也,张秋翔,蔡纪宁
MA Li-jun,LI Shuang-xi,MA Ye,ZHANG Qiu-xiang,CAI Ji-ning

参考文献(References)：

• [1]Mnler H K,Nan B S.流体密封技术:原理与应用[M].程传序,译.北京:机械工业出版社,2002.
• [2]代广平,许小平,姚子荣.裂解气压缩机浮环密封的结构及控制系统分析[J].石油化工应用,2012,(1):95-97.
• [3]贾江宁,陈志,李建明,等.浮环密封的结构分析及研究现状[J].机械,2007,34(10):1-3.
• [4]马纲,席平,沈心敏,等.柔性支承浮环柱面气膜密封准动态特性分析[J].航空动力学报,2010,(5):1190-1196.
• [5]陈志,高春阳,范唯超,等.浮环密封流场数值模拟及泄漏率公式的修正[J].四川大学学报:工程科学版,2016,(1):208-214.
• [6]Arghir M,Nguyen M H,Tonon D,et a1.Analytic modeling of floating ring annular seals[J].Journal of EngineeringforGasTurbinesandPower,2011,134(5):577-586.
• [7]黄莉,彭旭东,白少先,等.不同型槽端面干气密封的性能对比研究[J].流体机械,2010,38(8):14-17.
• [8]胡国桢,石流,阎家宾.化工密封技术[M].北京:化学工业出版社,1990.
• [9]刘占生,夏鹏,张广辉,等.浮环密封运动机理及对轴系稳定性的影响[J].振动与冲击,2016,(9):110-116.
• [10]陈涛,刘美红.操作参数对柱面气膜密封性能的影响[J].流体机械,2014,42(12):43-46.
• [11]苏泽辉,刘美红.T型模柱面气膜密封CFD数值分析[J].流体机械,2016,44(12):33-37.
• [12]王磊,李双喜,朱乔峰,等.基于PSO-BP的调控型气体密封状态参数智能计算方法研究[J].流体机械,2017,45(11):10-16.
• [13]李宁,穆塔里夫·阿赫迈德,吕星刚.螺旋槽机械密封摩擦副界面流固耦合分析[J].流体机械,2016,44(1):29-33.
• [14]王世宏,王冰清,孟祥铠,等.多孔端面机械密封在催化剂泵轴端密封中的应用[J].流体机械,2016,44(7):38-41.
• [15]马豪,杨传民,郑毅,等.利乐复合材料与PE密封条纵封热封能规律的研究[J].包装与食品机械,2017,29(2):26-30.
• [16]肖永全,给袋式自动包装机在复合调味酱料包装中的应用[J].包装与食品机械,2017,29(4):66-69.
• [17]王云飞.气体润滑理论与气体轴承设计[M].北京:机械工业出版社,1990.