射流泵最佳参数的确定方法Method of Optimal Parameter Ascertainment of Jet Pump
王常斌,林建忠,石兴
WANG Chang bin 1;2 ;LIN Jian zhong 1;
摘要(Abstract)：
根据能量守恒原理得出了射流泵效率计算公式 ,再利用多元函数极值原理给出了射流泵最优参数方程 ,求解并给出了射流泵基本性能包络线和效率包络线 ,分析了摩擦损失系数和密度比对最优参数的影响 ,确定出最优化面积比值。理论计算结果表明 :在等密度体系和Petrie给出的摩擦损失系数条件下 ,最优面积比为 0 .2 80 ,与文献 [8]中给出的实验结果相近 ;摩擦损失系数是影响射流泵效率的主要因素 ,密度比对最优工作点有一定的影响 ;最优面积比只与摩擦损失系数有关 ,而与流体间的密度比无关。研究结果对工程应用具有指导意义
The formulation of efficiency for the jet pump is derived. Then the optimal parameter equation for jet pump is given out based on the multi variable limitation theory. The equation is solved and the elementary property convex line and efficiency convex lines are given out. The effects of friction loss coefficient and density ratio on the optimal parameter are analyzed. The optimal area ratio is got too. The results of theory analyzing show that under equal density system and with the friction loss coefficient given out by Petrie, the optimal area ratio is 0.280, which is appropriate to experimental result of [8]. The results show that the friction loss coefficient is the key factor affecting the efficiency of pump. The density ratio has a moderate effect on the property of jet pump. The optimal area ratio is singly related with friction loss coefficient, and it is not related to the density ratio of fluids. The conclusion is helpful to the practice usage.
关键词(KeyWords)：
射流泵;最优参数;效率;计算
jet pump;optimal parameter;efficiency;calculation
基金项目(Foundation):
作者(Authors):
王常斌,林建忠,石兴
WANG Chang bin 1;2 ;LIN Jian zhong 1;
参考文献(References)：
- [1] 张怀文.射流泵模拟和设计[J].采油工艺情报.1990.112-128.
- [2] 张日方,杨俭.混凝土射流泵装置的理论设计[J].流体机械.2000,28(2):26-28.
- [3] 曾崇,石海峡.射流泵装置排涝机组的设计与应用[J].流体机械.2002,30(11):19-20.
- [4] 李兆敏,王汝元提高射流泵引射率的实验研究[J]石油大学学报(自科版),1993,17(6):4144
- [5] 赵淑兰,张正泉.影响喷射泵工作性能的单因素分析[J].西南石油学院学报,1996,18(2):8794
- [6] 沈东,何士华.提高射流泵性能的途径研究[J].云南工业大学学报,1996,12(3):14
- [7] WinotoSH ,LiH ,ShahDA .Efficiencyofjetpumps[J]JournalofHydraulicEngineering,2000,126(2):150156
- [8] NingT ,SatofukaN .NipponKikaiGakkaiRonbunshu[J]BHen/TransactionsoftheJapanSocietyofMechani calEngineers,PartB ,1997,63(608):12431250.
- [9] 成井,等ジェットポンプ吸引·混合部の性能解析[A].日本机械学会论文集(B编)[C].1991,57(2):575580.
- [10] 陆宏圻.射流泵技术的理论及应用[M].水利电力出版社,1987
- [11] BrownKE ,PetrieH .ThetechnologyofArtificialLiftMethods[M].PennwellPublishingCo.,Tulsa,OK ,1980
- [12] 蔡启伦.喷射泵设计计算公式的改进[J].江汉石油学院学报,1988,10(4):3946.