王振环,崔然成,权宁哲,赵新学
WANG Zhenhuan,CHOI Younsung,KWOMN Youngchul,ZHAO Xinxue

• 1:滨州学院机电工程学院
• 2:韩国制冷空调认证中心
• 3:韩国鲜文大学机械ICT融合工程学院

摘要(Abstract)：

为了确定不同参数条件对10 kW制冷机组用冷凝器换热性能的影响，利用空气焓差法测试冷凝器空气侧容量和压降性能的影响，通过改变翅片形状(4种)，翅片节距(5种)，管排数(4种)和空气流量(6种)进行了冷凝器的性能特征研究，并且通过对比分析不同冷凝器规格下的10 kW制冷机组的制冷容量和压降情况。试验结果表明：首先确定最佳性能下冷凝器翅片类型为波纹状，然后测试得到最佳性能下波纹状翅片的规格为翅片节距3 mm，管排数4排，空气流量90 m~3/min，试验结果可为冷藏/冷冻车辆制冷机组性能研究提供参考。
In order to study and determine the influence of different parameters on the heat transfer performance of the condenser used in a 10 kW refrigeration unit，the effects of air-side capacity and pressure drop performance of the condenser were tested by the air enthalpy difference method，and the performance characteristics of the condenser were studied by changing the fin shape(4 types)，fin pitch(5 types)，tube row(4 types) and air flow rate(6 types).And the refrigeration capacity and pressure drop of 10 kW refrigeration units under different condenser specifications were compared and analyzed.The experimental results show that it is first determined that the condenser fin type with the best performance is wavy.Then the test shows that the wavy fin specifications under the best performance are 3 mm fin pitch，4 rows of tubes，and air flow rate of 90 m~3/min.The experimental results provide a reference for the research on the performance of refrigeration unit of 10 kW refrigerated/chilled vehicle.

关键词(KeyWords)： 容量;冷凝器;热交换器;传热;压降;制冷机组
capacity;condenser;heat exchanger;heat transfer;pressure drop;refrigerator unit

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(52075047);; 山东省重点研发计划项目(2018GNC112003);; 博士科研启动基金项目(2018Y132019Y39)

作者(Author): 王振环,崔然成,权宁哲,赵新学
WANG Zhenhuan,CHOI Younsung,KWOMN Youngchul,ZHAO Xinxue

参考文献(References)：

• [1]李锦，谢如鹤.冷藏运输装备技术研究进展[J].流体机械，2014，42(5)：82-87.LI J，XIE R H.Research progress of refrigerated transport equipment technology[J].Fluid Machinery，2014，42(5)：82-87.
• [2]李锦，谢如鹤.冷藏车厢内温度波动特性分析[J].流体机械，2014，42(1)：63-67.LI J，XIE R H.Analysis on temperature fluctuations characteristics of the refrigerated compartments[J].Fluid Machinery，2014，42(1)：63-67.
• [3]臧润清，周会芳，张晨旭.四种不同流程布置的风冷式冷凝器的试验研究[J].流体机械，2020，48(9)：83-88.ZANG R Q，ZHOU H F，ZHANG C X.Experimental study on air-cooled condensers with four different process layouts[J].Fluid Machinery，2020，48(9)：83-88.
• [4]李海军，张中来，苏之勇，等.风机对冷藏车制冷系统性能的影响[J].流体机械，2021，49(7)：91-97.LI H J，ZHANG Z L，SU Z Y，et al.The influence of fans on the performance of refrigerated truck refrigeration system[J].Fluid Machinery，2021，49(7)：91-97.
• [5]张亚宁.一种立式U形管换热器结构分析与设计[J].化工设备与管道，2021，58(2)：43-48.ZHANG Y N.Structural analysis and design of one special vertical U tube heat exchanger[J].Process Equipment & Piping，2021，58(2)：43-48.
• [6]薛子萱.板式换热器框架的有限元分析及应变试验研究[J].化工设备与管道，2020，57(1)：41-46.XUE Z X.Finite element analysis and strain test for frame in plate heat exchanger[J].Process Equipment & Piping，2020，57(1)：41-46.
• [7]龚毅，刘旭，杨雅浓，等.内翅板蒸发式冷凝器降膜流动与传热特性[J].制冷学报，2016，37(4)：20-26.GONG Y，LIU X，YANG Y N，et al.Characteristics of falling film flow and heat transfer in internal fin-plate evaporative condenser[J].Journal of Refrigeration，2016，37(4)：20-26.
• [8]LEE W J，JEONG J H.Deduction method of the optimum number of circuits for fin-tube con-denser[C]//The Society of Air-conditioning and Refrigerating Engineers of Korea，2015：148-151.
• [9]丁炜堃，邓斌，陶文铨.小管径空调冷凝器数值模拟及流路设计[J].工程热物理学报，2009，30(8)：1389-1392.DING W K，DENG B，TAO W Q.Circuit design and performance simulation of a small-diameter tube condenser of an air conditioner[J].Journal of Engineering Thermophysics，2009，30(8)：1389-1392.
• [10]CHO H G，KIM T H，SEO K J.A Study on the performance database construction for heat exchanger simulation[J].The Society of Air-conditioning and Refrigerating Engineers of Korea，2015，139-144.
• [11]陈洁璐，蔡珊珊，陈焕欣，等.翅片类型对风冷冷凝器空气侧特性影响的分析[J].制冷技术，2017，37(3)：49-52.CHEN J L，CAI S S，CHEN H X，et al.Analysis of impacts of fin type on air-side performance of an air cooled condenser[J].Chinese Journal of Refrigeration Technology，2016，37(4)：20-26.
• [12]SON Y W，LEE J H.Experimental study of the heat transfer rate of the heat transfer rate of the plate fin-tube condenser for a household refrigerator[J].Journal of Korea Academia-Industrial Cooperation Society，2014，15(8)：4802-4808.
• [13]CHA H，RYU G N，KIM J R.Study on performance improvement air cooled condenser considering ambient condition[J].Journal of Korean Society of Mechanical Engineers，2015，3(3)：201-207.
• [14]郭梦茹，蔡珊珊，陈焕欣，等.翅片管式冷凝器性能分析及多目标优化[J].制冷与空调，2018，18(4)：93-98.GUO M R，CAI S S，CHEN H X，et al.Performance analysis and multi-objective optimization of finned-tube condenser[J].Refrigeration and Air-Conditioning，2018，18(4)：93-98.
• [15]KIM N H.An experimental study on the airside performance of fin-and-tube heat exchangers having wide louver fin[J].The Society of Air-conditioning and Refrigerating Engineers of Korea，2015，27(5)：254-262.
• [16]秋雨豪.三种常见的翅片型式对翅片管式换热器性能的影响[J].制冷与空调，2019，19(9)：40-43.QIO Y H.Influence of three common fin types on performance of finned-tube heat exchangers[J].Refrigeration and Air-Conditioning，2019，19(9)：40-43.
• [17]SHON B H，KANG Y T.Condensation heat transfer and pressure drop characteristics of low GWP refrigerants in heat exchangers[C]//The Society of Air-conditioning and Refrigerating Engineers of Korea，2016：617-620.
• [18]张园明，丁国良，马小魁.干湿工况下波纹翅片管换热器空气侧特性的对比[J].机械工程学报，2008，44(9)：209-214.ZHANG Y M，DING G L，MA X K.Comparison of airside characteristics of wavy fin-and-tube heat exchangers under dry and wet conditions[J].Chinese Journal of Mechanical Engineering，2008，44(9)：209-214.