高俊峰,赵嘉逸,冯玉林,杨玲玲,李伟,明友
GAO Junfeng,ZHAO Jiayi,FENG Yulin,YANG Lingling,LI Wei,MING You

• 1:合肥通用机械研究院有限公司
• 2:合肥通用机电产品检测院有限公司

摘要(Abstract)：

针对不连续接触磨损问题，以硬密封浮动球阀中浮动球密封结构为研究对象，将欧拉-拉格朗日耦合法(CEL)、全局网络重构法(ALE)、修正Archard模型与硬密封条件下的数值计算模型相结合，利用Abaqus子程序UMESHMOTION，实现对非连续接触密封结构的磨损仿真分析，探究流体介质压力、启闭速度及密封面宽度等对密封面磨损特性的影响规律，揭示不连续接触条件下的磨损机制；提出密封结构接触面全局磨损量均值(GWA)的评价方法。结果表明：非连续接触形式下，磨损较大位置出现应力集中；启闭速度和密封面宽度对密封面磨损影响较小；当V_(oc)为2 mm/s时GWA最小；当b_m为3.0 mm时GWA最小；流体介质压力对密封面磨损影响较大；非连续接触的磨损机理主要是磨粒磨损和疲劳磨损。研究结果可为不连续接触结构的优化设计提供理论基础和技术支撑。
In order to solve the problem of discontinuous contact wear，the floating ball seal structure in the floating ball valve was taken as the research object，and the Euler-Lagrange coupling method(CEL)，the global network reconstruction method (ALE)，and the modified Archard model were combined with the numerical computation model to realize the wear simulation analysis of the discontinuous contact seal structure using the Abaqus subroutine UMESHMOTION，investigate the influence law of fluid medium pressure，opening and closing speeds and sealing face widths on the wear characteristics of sealing faces，and reveal the wear mechanism under discontinuous contact conditions.An evaluation method for the mean value of global wear on the contact surface of the seal structure was proposed.The study results show that in the form of discontinuous contact，stress concentrations occur at locations of high wear.Opening and closing speeds and sealing face widths have less influence on sealing face wear.GWA is smallest when Voc is 2 mm/s.GWA is smallest when bm is 3.0 mm.Change in the fluid medium pressure has a greater effect on sealing face wear.The wear mechanism of discontinuous contact seal structure is mainly based on abrasive wear and fatigue wear.The results of the study can provide theoretical basis and technical support for the optimal design of discontinuous contact seal structures.

关键词(KeyWords)： Archard磨损模型;非连续接触;浮动球密封结构;磨损特性;欧拉-拉格朗日耦合;全局网络重构
Archard theoretical model;discontinuous contact;float ball seal structure;wear characteristics;CEL method;ALE method

Abstract:

Keywords:

基金项目(Foundation): 国家重点研发计划项目(2018YFB2004002)

作者(Author): 高俊峰,赵嘉逸,冯玉林,杨玲玲,李伟,明友
GAO Junfeng,ZHAO Jiayi,FENG Yulin,YANG Lingling,LI Wei,MING You

参考文献(References)：

• [1]冯玉龙，杨康新，杨昌群，等.新型四阀瓣式无摩擦球阀结构的研制[J].油气储运，2021，40(7)：796-801.FENG Y L，YANG K X，YANG C Q，et al.Development of a new four-disc friction-free ball valve[J].Oil & Gas Storage and Transportation，2021，40(7)：796-801.
• [2]曹海.耐磨球阀在煤直接液化工艺的应用及失效分析[J].化工管理，2021(26)：178-179.CAO H.Application and failure analysis of wear resistant ball valve in direct coal liquefaction process[J].Chemical Engineering Management，2021(26)：178-179.
• [3]丁浩亮，张凌东，于晗，等.超低温球阀用聚三氟氯乙烯密封环的热压工艺与性能[J].合成树脂及塑料，2021，38(2)：67-70.DING H L，ZHANG L D，YU H，et al.Application of hot-pressing technology in PCTFE sealing ring for ultra-low temperature ball valves[J].China Synthetic Resin and Plastic，2021，38(2)：67-70.
• [4]彭康，陈琦，喻九阳，等.玻璃纤维增强塑料浮动球阀密封性能分析[J].润滑与密封，2023，48(1)：116-122.PENG K，CHEN Q，YU J Y，et al.Sealing performance analysis of glass fiber reinforced plastic floating ball valve[J].Lubrication Engineering，2023，48(1)：116-122.
• [5]于龙杰，钱锦远，金志江.阀门密封性能的研究进展[J].润滑与密封，2021，46(9)：134-142.YU L J，QIAN J Y，JIN Z J.Research progress on sealing performance of valve[J].Lubrication Engineering，2021，46(9)：134-142.
• [6]SOTOODEH K.Valve operability during a fire[J].Journal of Offshore Mechanics and Arctic Engineering-Transactions of the ASME，2019，141(4)：044001.
• [7]姚怀宇，蒋诚航，金志江，等.阀门失效的研究进展[J].流体机械，2021，49(10)：74-83.YAO H Y，JIANG C H，JIN Z J，et al.Research progress on valve failure[J].Fluid Machinery，2021，49(10)：74-83.
• [8]MNIF R，JEMAA M C B，ELLEUCH R.Tribological failure analysis of ball valve seals[J].International Journal of Microstructure and Materials Properties，2013，8(4-5)：385-396.
• [9]SONG X，WANG L，PARK Y.Analysis and optimization of nitrile butadiene rubber sealing mechanism of ball valve[J].Transactions of Nonferrous Metals Society of China，2009，19：s220-s224.
• [10]SCHMIDT T，ANDRé M，POLL G.A transient 2D-finite-element approach for the simulation of mixed lubrication effects of reciprocating hydraulic rod seals[J].Tribology International，2010，43(10)：1775-1785.
• [11]常凯.基于ANSYS的O形密封圈磨损仿真方法研究[J].液压与气动，2018(2)：98-103.CHANG K.Wear Simulation method of O-ring based on ANSYS[J].Chinese Hydraulic & Pneumatics，2018(2)：98-103.
• [12]张志宏，李旭东.基于ABAQUS的身管涂层磨损行为研究[J].甘肃科学学报，2017，29(3)：99-103.ZHANG Z H，LI X D.Behavioral study of barrel coating wear based on ABAQUS[J].Journal of Gansu Sciences，2017，29(3)：99-103.
• [13]高振山，邓效忠，陈拂晓，等.基于修正Archard理论的螺旋锥齿轮锻造模具寿命预测[J].中国机械工程，2014，25(2)：226-229.GAO Z S，DENG X Z，CHEN F X，et al.Die service life estimation based on modified Archard method in forging spiral bevel gear[J].China Mechanical Engineering，2014，25(2)：226-229.
• [14]董书娜，杜春华，崔亚辉，等.基于Archard模型的刷式密封单边磨损特性[J].航空动力学报，2020，35(7)：1437-1446.DONG S N，DU C H，CUI Y H，et al.Unilateral wear characteristics of brush seal based on Archard model[J].Journal of Aerospace Power，2020，35(7)：1437-1446.
• [15]张家伟，王金业，吴艳丽，等.球阀阀体的两种多向模锻成形工艺探究[J].锻造与冲压，2023(7)：41-43.ZHANG J W，WANG J Y，WU Y L，et al.Ball valve body two kinds of multidirectional die forging forming process investigation[J].Forging & Metal Forming，2023(7)：41-43.
• [16]陆怡，查涵清，姚润盐.特大口径全焊接球阀的密封性分析及结构改进[J].计算机仿真，2022，39(8)：441-445.LU Y，CHA H Q，YAO R Y.Sealing performance analysis and structure improvement of super large diameter fully welded ball valve[J].Computer Simulation，2022，39(8)：441-445.
• [17]LEE R S，JOU J L.Application of numerical simulation for wear analysis of warm forging die[J].Journal of Materials Processing Technology，2003，140(1)：43-48.
• [18]孙恒，王美丽.ASTM A105A与A487 CA6NM异种钢焊接工艺研究[J].技术与市场，2023，30(3)：49-52.SUN H，WANG M L.ASTM A105A and A487 CA6NM dissimilar steel welding process research[J].Technology and Market，2023，30(3)：49-52.
• [19]中华人民共和国工业和信息化部.球阀静压寿命试验规程：JB/T 8861-2017[S].北京：机械工业出版社，2017.Ministry of Industry and Information Technology of the People's Republic of China.Ball valve-potential pressure life test regulation：JB/T 8861—2017[S].Beijing：China Machine Press，2017.
• [20]姜峰，杨鼎瑞，张延斌.固定球阀主密封副结构尺寸对密封性能的影响[J].流体机械，2021，49(8)：87-93.JIANG F，YANG D R，ZHANG Y B.Influence of structure size of main sealing pair of fixed ball valve on sealing performance[J].Fluid Machinery，2021，49(8)：87-93.