袁丹青,陈向阳,杨敏官,袁寿其
YUAN Dan-qing,CHEN Xiang-yang,YANG Min-guan,YUAN Shou-qi(Jiangsu University

• 1:江苏大学

摘要(Abstract)：

从反应堆冷却剂泵的经济性出发,以国内某300MW e级核电站主泵为对象,利用计算流体技术(CFD)对其内部流场进行了数值研究,以效率为中心,重点分析了主泵叶轮段、导叶体段的速度、压力分布。通过计算9个不同流量点,得到了叶轮段和整个泵段的性能曲线,并根据对比分析结果提出了优化设计方案。
From the economy of reactor coolant pump,based on computational fluid dynamics technology the numerical investigation of internal flow in reactor coolant pump of one 300MWe nuclear power plant in China was made.The distribution of velocity and pressure in impeller and guide vane parts was analyzed which was established in efficiency.Through nine different Q conditions,the performance curves of impeller part and the whole reactor coolant pump were got.Then according to the analysis the optimum design methods was advanced.

关键词(KeyWords)： 反应堆冷却剂泵;经济性;数值研究;优化设计
reactor coolant pump;economy;numerical investigation;optimum design

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 袁丹青,陈向阳,杨敏官,袁寿其
YUAN Dan-qing,CHEN Xiang-yang,YANG Min-guan,YUAN Shou-qi(Jiangsu University

参考文献(References)：

• [1]施法佳,陈红勋.轴流泵内部流动数值模拟中湍流模式可用性的研究[J].上海大学学报(自然科学版),2006,(3):273-277.
• [2]ROHDE U,HOHNE T,KLIEM S,et al.Fluid mixingand flow distribution in a primary circuit of a nuclearpressurized water reactor—Validation of CFD codes[J].Nuclear Engineering and Design,2007,237:1639?1655.
• [3]关醒凡.现代泵技术手册[M].北京:宇航出版社,1995.
• [4]杨昌明,陈次昌,王金诺.轴流泵间隙流动数值模拟与试验研究[D].西南交通大学,2003.
• [5]张克危.流体机械原理[M].北京:机械工业出版社,2000.
• [6]李龙,王泽.粗糙度对轴流泵性能影响的数值模拟研究[J].农业工程学报,2001,(01):132-135.
• [7]王福军.计算流体动力学分析CFD软件原理与应用[M].北京:清华大学出版社,2004.
• [8]DURMUS KAYA.Experimental study on regaining thetangential velocity energy of axial flow pump[J].En-ergy Conversion and Management,2003,44:1817-1829.
• [9]UZOL O,BRZOZOWSKI D,CHOW Y C,et al.A da-tabase of PIV measurements within a turbomachinerystage andsample comparisons with unsteady RANS[J].Journal of Turbulence,2007.
• [10]Shao-Yi Hsia,Shih-Ming Chiu and Jyin-Wen Cheng.Sound field analysis and simulation for fluid machines[J].Advances in Engineering Software,2008.