超高速燃气涡轮泵机械密封的分析与研究Analysis of A Mechanical Seal for Superspeed Gas Turbopump
张淑敏,胡丽国,孟祥铠
ZHANG Shu-min1,HU Li-guo1,MENG Xiang-kai2(China Academy of Launch Vehicle Technology
摘要(Abstract)：
从辅助密封圈的预接触压力和接触压力、机械密封端面静态力平衡分析、摩擦副温度场和应力场分析3个方面,研究了某火箭发射时涡轮泵排气背压的增大对机械密封工作性能的影响,并得出了机械密封满足火箭发射使用要求的结论。
The influence of the increased turbopump exhausting back pressure on working performance of mechanical seals as the rocket being launched submarine was discussed from the aspects of auxiliary seals performance,the static analysis of mechanical seals,friction pairs temperature distribution and stress field,and the conclusion was given that the mechanical seals can meet the application requirements of rocket launched.
关键词(KeyWords)：
超高速;涡轮泵;机械密封
super-speed;gas turbopump;mechanical seal
基金项目(Foundation):
作者(Author):
张淑敏,胡丽国,孟祥铠
ZHANG Shu-min1,HU Li-guo1,MENG Xiang-kai2(China Academy of Launch Vehicle Technology
参考文献(References)：
- [1]顾永泉.流体动密封[M].东营:石油大学出版社,1990.
- [2]Peng X D,Xie Y B,Gu Y Q.Evaluation of mechani-cal face seals operating with hydrocarbon mixtures[J].Tribology International,2003,36(4):199-204.
- [3]李双喜,王为伟,史金鑫,等.端面刷式密封性能分析[J].流体机械,2012,40(6):45-50,32.
- [4]俞树荣,曹兴岩,丁雪兴,等.非接触动密封螺旋槽气膜刚度数值模拟与分析[J].流体机械,2012,40(4):16-20.
- [5]彭旭东,谢友柏,顾永泉.机械密封端面温度的确定[J].化工机械,1996,23(6):23-26,19.
- [6]Zeus D.Vicous Friction in small gaps calculations fornon-contacting liquid or gas lubricated end face seal[J].Tribology Transactions,1990,33(3):454-462.
- [7]彭旭东,刘伟,白少先,等.热弹变形对核主泵用流体静压型机械密封性能的影响[J].机械工程学报,2010,46(23):146-153.
- [8]李国成,王为良,李荣生.焦炭塔瞬态温度场及热应力分析[J].压力容器,2010,27(9):21-25,27.
- [9]廖和滨.机械密封环温度场/应力场的数值模拟及实验研究[D].福州:福州大学硕士论文,2005.